您要查找的是不是：
- rear axle universal joint 后轴万向节
- rear axle universal joint jaw 后轴万向节爪
- front axle universal joint centre ball 前桥万向节中心球
- "Disconnect the rear axle or the front end of the propeller shaft or the universal joint, according to type. Where needle bearings are used, tape the bearing retainers to the shaft to avoid losing needles." 根据变速器的类型,拆下后桥或者传动轴或者万向节。如使用滚针轴承,应用布带捆住轴承护圈,以避免滚针失落。
- The rear axle carries the greatest weight. 后轴负荷最重的分量。
- Separate the rear universal joint from the transfer case yoke. 从传动箱轴轭上拆下后万向节。
- A pole connecting the rear axle of a vehicle with the front. 连接杆连接车辆前后轴的杆
- front axle universal joint ball 前桥万向节球
- Front axle moved forward 60mm, rear axle moved backwards 20mm. 前桥前移 60 厚米，后桥后移 20 毫米。
- After inputting the road-load spectrum, all the rear axle link point loads were calculated, and the highest loads on each joint were obtained. 然后采用后轮道路载荷谱作为输入载荷，再进行仿真分析，得到了最大峰值载荷时各连接点处的载荷。
- Align mark on front universal joint, or CV joint, to the mark on the axle pinion yoke, or flange. 将前万向节或CV万向节上的标志与车轴小齿轮轴轭或凸缘上的标志对准。
- Hangzhou JACK Universal Joint Co., Ltd. 杭州杰克万向节有限公司。
- The rear axle is stationary, and is bolted rigidly to the main frame. 后轴是固定的，用螺栓刚性固定在主机架上。
- Align mark on the rear link yoke and universal joint to the mark on the transfer case yoke. 将后连接轴轭和万向节上的标志与传动箱轴轭上的标志对准。
- Remove the universal joint strap bolts at the pinion shaft yoke. 在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
- Company specialize in automobile fittings, sandy beach car rear axle always succeeding and auxiliary products. 公司专业生产汽车配件及其配套产品。
- The bike chain drives a sun gear on the rear axle, which transmits power to planetary gears situated around it. 自行车的链条会驱动后轮轮轴上的太阳齿轮，将动力传送到四周的行星齿轮。
- Applications in universal joint products of riveting machine. 铆接机在万向节产品上的应用。
- The reason the propeller shaft shortens as the angle increases is that the rear axle and differential move in a shorter arc than the propeller shaft. 当角度增加时,传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。
- The rack-and-pinion steering is sharp, and the torsion beam rear axle gives the car a grown-up feel. 齿条式齿轮转向是敏锐的，而尾轴扭力梁给车子有大车的感觉。
