您要查找的是不是：
- pulsed plasma polymerization 脉冲等离子体聚合
- The processing conditions employed in the technique of plasma polymerization , the ageing of the polymer films and the corrosion of metal substrates are the main factors which affect the heat transfer performance and the life time of DWC. 等离子体聚合工艺条件、基底金属发生腐蚀、聚合薄膜老化是影响滴状冷凝传热及寿命的主要因素。
- There are three ways using plasma technology to modify the surface properties of polymer materials,which are plasma surface treatment,plasma polymerization and plasma graft copolymerization. 运用等离子体技术改变高分子材料的表面性质的方法主要有三类:等离子体处理、等离子体聚合和等离子体接枝聚合。
- The plasma polymerization for n Butylamine was discribed in this paper. 采取等离子体方法，首次将正丁胺单体聚合成聚正丁胺薄膜。
- According to the analytical results,the mechanism of plasma polymerization of a-pinene is suggested. 根据分析结果，提出a-蒎烯等离子体聚合机理是自由基聚合反应机理。
- Igniter system is one of the key components in pulsed plasma thruster (PPT).It ignites the main discharge of the capacitor and influences the performance of PPT. 摘要点火回路引燃脉冲等离子体推力器的主电容放电，是推力器的关键部分之一，其性能直接影响到推力器运行的成败。
- The coating nano-metal materials are prepared by physical adsorption, surface deposition, arc discharge, plasma polymerization, laser CVD and emulsion polymerization. 其制备方法主要有物理吸附法、表面沉积法、电弧放电法、等离子体聚合法、激光化学气相沉积法、乳液聚合法等。
- Abstract： The plasma polymerization of aniline in a capacitivity coupled of glow discharge was described and suitable conditions for plasma polymerization were found. 摘要： 应用外部电容耦合式等离子体聚合装置,研究了苯胺等离子体聚合规律,找到了最佳的聚合条件。
- At last, the theories of these spark plugs were analyzed and an optimized spark plug structure was obtained.This research will be of benefit for the reliable operation of pulsed plasma thruster. 最后分析了三种火花塞的点火机理，获得了较好放电性能的火花塞结构形式，为脉冲等离子体推力器的稳定运行提供了重要的依据。
- Influence of Plasma Polymerization on Polymer Deposition Rate 等离子体聚合工艺对聚合沉积速率的影响
- Deposition of vinyl acetic acid through the pulsed rf plasma polymerization 脉冲射频等离子体聚合沉积乙烯基乙酸
- A novel pulse plasma light source stimulated by a pulsed sinusoidal high frequency supply is reported,and a commercial PS plate is successfully exposed. 本文报道了一套采用正弦脉冲高频电源激励的新型氮气等离子体光源,首次获得了光源的准脉冲输出,并成功的对一种超感度PS版进行了曝光。
- The dropwise condensation (DWC) of water vapour has been achieved on the ultra thin poly(HFP) film coated on copper tube surfaces which has been prepared by the technique of plasma polymerization. 采用等离子体聚合技术制备了铜基聚六氟丙烯薄膜，并实现了水蒸汽的滴状冷凝。
- In the paper, the law of plasma polymerization of dimethylaniline in a capacitively coupled of glow discharge was described and suitable conditions for plasma polymerization were found. 应用外部电容耦合式等离子体聚合装置，研究了二甲基苯胺等离子体聚合规律，找到了最佳的聚合条件。
- repetitively pulsed plasma accelerator 重复脉冲等离子体加速器
- AC middle frequency pulsed plasma power supply 中频交流脉冲等离子体电源
- Keywords plasma polymerization;plasma polyacetylene;structure of polymer; 等离子体聚合;等离子体聚乙炔;聚合物结构;
- Analysis of electrode material effect on organic exhaust gas decomposition by pulse plasma. 电极材料对脉冲等离子体降解有机废气的影响分析。
- The result showed that plasma polymerized Trimethylphosphit can improve hydrophile of 317L stainless-steel dramatically. 结果发现亚磷酸三甲脂等离子体聚合膜可以明显改善不锈钢表面的亲水性。
- PLASMA POLYMERIZATION OF N-CONTAINING COMPOUNDS 含氮化合物的等离子共聚研究
