您要查找的是不是：
- Phase Measurement Method for Pulse Power Amplifier 脉冲功率放大器相位测量方法
- pulse power amplifying 脉冲功率放大
- microwave pulsed power amplifier MESFET脉冲微波功率放大器
- The pump threshold pulse power of SR and ASR are 18. OW and 25. 4W. 用脉宽为10ns的可调谐掺铒光纤激光器作为背向泵浦源;得到背向斯托克斯拉曼(SR)和反斯托克斯拉曼(ASR)的脉冲放大阈值泵浦功率分别为18.;0W和25
- pulse power amplifier 脉冲功率放大器
- ATF34143 and MGF0919A are used to realize power amplifying, the output power is about 27.5dBm, P1dB is about 32dBm. 功率放大部分采用ATF-34143和MGF0919A做双级A类放大器设计，输出功率27.;5dBm，P1dB约32dBm；
- I'll demonstrate how to use the power amplifiers? 我来示范一下如何使用这个功率的放大器。
- Design of Multistage Power Amplifier in Ku Band. Ku波段多级功率放大器的研制。
- NRL developed a new set, the XAR, with 22 times the pulse power and 11 times the receiver sensitivity of the XAF. NRL研制出了新雷达XAR，比XAF提高了22倍的脉冲强度和11倍的接收器敏感度。
- Purpose: Medium power amplifier applications. 用途:用于中功率放大。
- The main circuit of the wire-incisory pulse power with PWM energy-controlled electric spark serves as a closed loop. PWM控制节能式电火花线切割脉冲电源主电路是一个电流闭环控制系统,放电电流的动态特性是影响电火花线切割加工工艺性能的重要因素。
- The EDM(electron discharge machining) dressing pulse power was developed based on the requirement of EDM dressing. 根据电火花修整的需要,研制了电火花修整脉冲电源。
- Some experiments and applications show that the portable pulse power supply is stable and reliable. 实验和应用表明,该小型脉冲电源具有较好的稳定性和可靠性。
- A pulse control circuit for EDM pulse power designed with AHDL was introduced in this paper. 用AHDL语言设计了适用于电火花加工机床脉冲电源的脉冲控制电路。
- Therefore, we use unipolar switching pulse width modulation scheme to realize a filterless Class-D power amplifier. 因此，我们利用单极性切换脉波宽度调变技术去实现无滤波器之D类放大器。
- This paper simply analyzes pulse generating circuit,pre amplifier,power amplifier through examples. 通过实例对脉冲发生、预放(驱动)、功放电路进行了简要分析。
- HE Guang-min, ZHAO WAN-sheng, GUO Yongfeng, et al.Research of the nanosecond pulse power[J].Electromachining & Moul, 1994, (4): 11-13. [3]何广敏;赵万生;郭永丰;等.;纳秒级脉冲电源的研制[J]
- Nickel is electrochemical micromachininged using nanosecond pulse power,millisecond pulse power and direct current power. 利用纳秒级脉冲电源、毫微秒级脉冲电源和直流电源,进行了电解加工试验。
- Purpose: Audio frequency power amplifier applications. 用途:用于音频功率放大。
- Connect the Power Amplifier to Analog Channel B of the interface. 将功率放大器连接到接口上的模拟通道B。
