您要查找的是不是：
- Flemings M C. Behavior of metal alloys in the semi solid state[J]. Metall Trans, 1991.22B(6) : 269-293. 王渠东丁文江.;镁合金及其成形技术的国内外动态与发展[J]
- Flemings M C.Behavior of Metal Alloys in the Semi solid State[ J].Metallurgical Transactions A.1991,22A:957 王雅贞;张岩;刘术国.;新编连续铸钢工艺与设备
- Semi Solid State 半固态
- Water passes from a liquid to a solid state when it freezes. 水结冰是由液态变为固态。
- Alarm horn in place of solid state audible device. 警报喇叭替代固态声音设备。
- Ice is the solid state of water. 冰是水的固态
- Soc., J.Power Sources and Solid State Ionics. 作为主要成员获北京市科学技术一等奖1项。
- A new process, liquidus semi continuous casting(LSC) to produce semi solid slurries of aluminum alloy, was presented. 结合铝合金半连续铸造的生产工艺,介绍了铸造铝熔体液面的控制措施以及每种控制措施的实践效果。
- Water passes from a liquid to a solid state when it freezes . 水冻结时由液体变成固体。
- Abstract: The research on simulation of semi solid forming processes including rheocasting, partial remelting and thixoforming, was reviewed. 论述了半固态金属加工技术，即流变铸造、二次加热与触变成形等工艺过程数值模拟技术的研究进展和现状。
- Through optimizing the processing parameters, semi solid Al 7%Si alloy cylinders with thixotropic non dentritic structures were successfully produced. 棒料内部组织形貌为具有类圆形轮廓的初生相晶粒浸润在细共晶体中,与传统的凝固枝晶组织有显著差异。
- Solid State Disks: Is Future Disruption on the Horizon? 固态磁盘:是否会中途夭折?
- Semi solid forming is one of new types of material processing.This paper analyses the present and the future of this new forming technology. 半固态加工是金属材料成形领域中的一种新工艺。分析了铝合金半固态成形技术的现状及发展趋向。
- Critical reviews in solid state and materials sciences. 固体与材料科学评论。
- Water passes from liquid to a solid state when it freezes. 水冷却到冰点时由液体变为固体。
- Thixotropy The property of letterpress and offset inks of becoming fluid when stirred and setting to a semi solid tate when left at rest for some times. 活版及柯式油墨的一种特性。当搅拌后,油墨变得稀,但让它静止一段时间,它又变回半固体状态的情况。
- To pass from the liquid to the solid state by loss of heat. 凝固通过失去热量而从液体状态转为固体状态。
- Ice is water in solid state. 冰是水的固体状态。
- Fluxes and cover gases are currently used for the melting and production processes, and semi solid thixocasting is also used to lower the operation temperature, but there still remain many problems. 目前一般采用熔剂覆盖和气体保护法熔炼生产镁合金,或采用半固态射铸成形工艺以降低作业温度,但都存在着不少缺点。
