您要查找的是不是：
- Ambient and process conditions are no limitation. 可靠,精却,不被工艺条件所限制。
- Impeller configuration is matched to the process conditions. 搅拌桨结构与工艺条件相匹配。
- Valnes of critical air-blowing under different process conditions ar... 得出了不同工艺条件下的临界吹气量值。
- The strength of the wool is not appreciably affected by carbonizing if the process conditions are carefully controlled. 如果碳化工艺做到了准确控制,羊毛的强度不会受到明显的影响。
- The optimized process conditions on SFA waste water treatment by PSB method are studied in this paper. 本文着重研究PSB处理SFA废水的优化工艺条件。
- The process conditions and points to controll elasticity, width and weft shrinkage were presented. 文中给出了染整加工中的工艺条件，指出了在整个加工过程中控制弹力、门幅及纬向缩水的注意事项。
- The effect of rubber structure and process conditions on HIPS properties in bulk -suspension process was studied. 采用本体-悬浮法研究了高抗冲聚苯乙烯(HIPS)所用橡胶的结构及工艺条件对产品性能的影响。 研究发现,随橡胶中乙烯结构含量的增加,HIPS橡胶接枝率增加;
- Check product quality as soon as process condition changes. 工艺条件改变后,要及时分析成品质量。
- This paper probes into the effects of process conditions on precursor fiber strength, elongation and chemical residual. 摘要本文探讨了工艺条件对粘胶原丝强度、伸长及化学物残留量的影响。
- The process conditions of acid hydrolysis were practised,while opti mal hydrolysis temperature was determined. 探讨了酸性水解条件．确定了适宜的水解温度。
- The solderability of as-plated Pd coatings produced under different process conditions is good. 镀态下,不同条件下制得的钯镀层具有良好的沾锡能力。
- In the article, the process conditions of wet surface modification of aphanitic graphite are studied. 选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。
- The process conditions of acetylene catalytic oxidation for producing oxalic acid was studied. 对乙炔催化氧化制备草酸的工艺条件进行了研究，用正交设计安排实验，得到了一组最佳工艺条件，并做了验证实验。
- Process conditions for the reforming section of an ammonia plant are optimized by process simulation. 采用过程模拟的方法对氨厂转化工序的工艺条件进行优化。
- Better finishing results are achieved by selecting proper catalyst and additives and optimizing the process conditions. 选择适宜的催化剂和添加剂,通过优化工艺条件获得较好的整理效果。
- The authors' experiments have confirmed the optimal sedimental agent and the corresponding optimal process conditions. 在实验中确定了最佳混凝剂和最佳工艺条件。
- The optimum process conditions are determined.The yield of cyclopentanone is up to 85% with a purity of more than 99%. 确定了适宜的工艺条件,环戊酮的收率为85%25以上,环戊酮产品纯度大于99%25。
- The proper process conditions were studied of the blended fermented milk of function L. 对功能性嗜酸乳杆菌和嗜热链球菌混合菌种发酵乳的最佳生产工艺条件进行研究。
- The catalysts and process conditions for the synthesis of urea-formaldehyde resin were studied. 对合成脲醛树脂的催化剂及工艺条件进行了研究。
- The effects of PIB/PVC blend ratio and process conditions on the dynamic and static mechanical properties are studied. 研究了PIB和PVC共混比例及工艺条件等对共混胶料的动、静态力学性能的影响。
