您要查找的是不是：
- principal shear stress 拄应力
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- stress couples acting on the principal shear planes 主剪面应力对
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- With gob span increasing, equivalent shear stress in basic roof increases. 随着采空区跨度的不断增加，基本顶等效剪力不断增大。
- The results indicate that the horizontal principal stresses are very low presently in Tangshan area, the maximum horizontal principal stress is only 7.8 Mpa near depth of 300m, and the maximum horizontal shear stress is 1 Mpa. 测量结果表明;现在唐山地区的应力水平很低;在接近300米的深度上最大水平主应力仅7.;8兆帕;最大水平剪应力值也仅1兆帕。
- Draw the element for maximum shear stress and mark values of all stresses. 画出最大剪应力的单元体并标出全部应力值。
- Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
- Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 粘结力最好根据图9中剪切应力和法向应力的关系曲线确定。
- The occurrence of high shear stress at the fibre end is a factor which is expected to lead to crack generation. 在纤维端部存在高切变应力视为导致产生裂缝的因素。
- An equation for the calculation of true shear strain was derived from the integration of infinitesimal shear strain in plane shearing process with constant principal shear strain direction. 对切应变主轴不变的平面简单切变过程,通过无穷小应变的积分,导出了真实切应变计算公式。
- Oxygen precipitates (useful for gettering) can reduce the yield strength (critical shear stress) up to fivefole. 氧沉淀(可用作吸杂)会使屈服强度(临界剪应力)降低为五分之一。
- Shear stress arises from forces that are parallel to the plane of the cross section. 切应力由平行于截面的力引起。
- Textbooks commonly denote shear stresses by the symbol and two subscripts. 教科书通常用符号和两个脚标表示剪应力。
