您要查找的是不是：
- The push rod does not seem to be working at all. 推杆好像根本不起作用。
- The push rod was screwed into a miniature piston head. 这根推杆拧紧在一个微型的活塞头上。
- For the unitary push rod, can operate when switch on. 整体推杆，接上电源即可运行。
- The method of force analysis of the reducer is proposed on the basis of a supposition of the distribution of contact pressure between the push rod roller and the gear rack. 介绍了这种减速器的结构和工作原理，并根据变形分析对齿条与推杆滚子间的接触压力分布做了假设。
- Install the high pressure relief valve in the compressor manifold fitting. 在压缩机歧管配件里安装高压释放阀。
- For pressure relief you turn the opening valve against clockwise direction. 压力释放时,逆时针旋转开口阀。
- Electrohydraulic push rod drives the two-way pump to output pressure oil with rotation of motor clockwise and counter-clockwise, by control of hydraulic valve, send to the hydraulic cylinder, to achieve the reciprocating movement of the piston rod. 电液推杆以电动机正反转，带动双向泵输出压力油，经液压阀控制，送至液压缸，实现活塞杆的往复运动。
- Install a 125 PSI pressure relief valve in the cold water supply line. 在冷水供应管道上安装一个125psi的减压安全阀。
- Brake pedal application causes the primary push rod to open the atmospheric inlet valvThis exposes the area behind the diaphragms to atmospheric pressurThe resulting pressure differential provides the extra apply pressure for power assist. 踏下煞车踏板使主推杆打开空气进气阀。这样使膜片扣件后面的隔室暴露与于大气压力下。由此产生压力差为倍力式煞车器提供了额外压力。
- When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged. 当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
- Put these two-elevator push rod out from the side back of the fuselage, then fix it with plastic U collet. 将此两根升降舵连杆钢丝从机身后部侧面开口中伸出后再拧上塑料U形夹头。
- Pressure relief devices protect storage tanks against overpressure hazards, you must know their set points. 压力释放装置用于防止超压的危险,你必须清楚它们的设定值。
- Do not walk on the top surfaces of the Powerbloc panels, rupture points for pressure relief. 不要在开关柜泻压顶板上行走。
- The connecting point for the push rod link to the torsion bars and dampers inside the chassis is now much higher. 在底盘内部，推杆与扭力杆和减震器的连接点现在高了很多。
- Must be installed to allow complete drainage of both the temperature and pressure relief valve and the discharge line. 必须正确安装,使得降温减压安全阀和排水管道都能够完全排泄。
- Description: Zhejiang Pingchai Pumps Industry Co.,Ltd ---- Oil pump,tappet valve guide,push rod. ------机油泵、气门挺杆、气门推杆、气门导管。
- Building valves - Combined temperature and pressure relief valves - Tests and requirements. 建筑阀门。温度和压力组合安全阀。试验和要求。
- In the oil pipeline of the electrohydraulic push rod, a self-locking valve is designed. 电液推杆的油路中，设计了自锁阀。
- Temperature and Pressure Relief Valve is required, but may not be factory installed. 需要降温减压安全阀,但可能不在工厂安装。
- Note: The installation of a separate pressure relief valve is necessary for installations using gas shutoffs. 注意:采用燃气关闭阀,有必要安装独立的压力安全阀。
