您要查找的是不是：
- powder rolling process 粉末轧制法
- The system pressure had very big fluctuation during rolling process. 在轧钢过程中系统压力出现大幅度波动。
- Mechanism of metal powder rolling where powder weight keeps constant before and after powder rolling,is different from that of conventional dense metal rolling. 金属粉末轧制机理与传统的致密金属轧制机理不同,在这里适用的是粉末轧制前后粉末重量相等原理。
- Yes,when steel product must be accurated in size and must have a smooth surface,the cold rolling process must be used. 能。如果钢材的尺寸精度要求很高，表面必须光洁，那么就需要进行冷轧。
- Rolling process adopts the advanced untwisted rolling device, keep wiring from twist and tension. 成卷工序采用先进的无扭曲成卷机,保证在布线中无扭曲和拉伸。
- The electronic workpiece acceleration ensures the quality of the decisive start of the rolling process. 电子控制的工件驱动装置确保了最开键的滚轧起始阶段的质量。
- Tungsten carbide can withstand the abrasive action of hot metal during the rolling process far better than cast iron. 碳化钨耐受轧制过程中热金属轧件磨蚀作用的能力比铸铁大得多.
- Yes. when steel product must be accurated in size and must have a smooth surface, the cold rolling process be used. 能。如果钢材的尺寸精度要求很高，表面必须光洁，那么就需要进行冷轧。
- A brick element re-meshing technique was presented for shape-metal rolling process. 摘要提出了一种适用于型钢轧制及其类似过程的六面体网格重构方法。
- In order to meliorate efficiency, it is decided to adopt rolling process in construction. 但碾压贫混凝土基层在国内应用较少，现行规范找不到依据。
- The results show that the grain of the strip was refined in the cold rolling process due to the DRX and DRV. 结果表明：在冷轧过程中，因动态再结晶和动态回复，使薄带的晶粒进一步得到细化。
- The influences of rolling process and impurity atoms on the texture developments were also analysed. 同时也分析了钢板变形过程及杂质原子对织构形成的影响。
- One of the method of curbing plate bending in jobbing sheet rolling process was researched. 研究了在中板轧制过程中抑制板坯弯曲的措施之一。
- Research on Powder Rolling of Metal Strips 金属带材粉末轧制的研究
- During the cool rolling process of SUS301 stainless steel,the punctual flaws and cracks are offen observed. SUS301不锈钢在冷轧过程中表面经常出现点状缺陷及裂纹。
- The deformative charateristics of cementite of white cast iron during the rolling process was investigated. 研究了惨碳体在白口铸铁轧制变形过程中的变化特点。
- Synopsis There are some factors that cause the formation of hot strip side-camber in the rolling process. 板带轧制过程中因受某些因素影响会形成侧弯。
- Test results of lead work-pieces verify the feasibility of rolling process and die design. 铅试件辗压试验结果证明辗压成形工艺和模具设计的可行性；
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- The pores of the sintered layer are filled with a mixture of PTFE (polytetrafluoroethylene) and other friction-reducing additives by a rolling process. 通过压制工艺,将PTFE(聚四氟乙烯)与其他能降低摩擦的添加剂组成的混合物填入烧结层上的细孔。
