您要查找的是不是：
- piston pin locking screw 活塞销锁紧螺钉
- piston pin lock ring 活塞销锁环
- Remove 2 clips securing piston pin. 拆下固定活塞销的两个夹。
- A piston pin fits into a round hole in the piston. 活塞销装在活塞的环形的孔里。
- The connecting rod is attached to the piston by the piston pin. 连杆与活塞的连接是采用活塞销。
- Loosen the height locking screw and remove the arm from the turntable. 放松高度螺丝，将唱臂自唱盘取下。
- Unload the wind window 4, loosen the lock screw of nut 5. 卸下通风窗4后;松掉锁紧螺母5上的锁紧螺钉.
- The piston pin joins the piston to the connecting rod. 活塞销把活塞和连杆连接起来。
- The thick part of the piston that holds the piston pin is the pin boss. 用来支撑活塞销的活塞厚的部分称为活塞销凸台。
- Replace the arm on the turntable and tighten the height locking screw sufficiently to hold the arm in position. 将唱臂重新装上，将高度螺丝锁到可让唱臂固定。
- The bottom view of the rifle, no locking screws. 自装枪的下方,无固定螺丝。
- Unscrew the carrier locking screw (item 2 in FIGURE 3-1) on the carrier handle (3. 鬆開托座把手上的托座鎖定螺絲(圖3-1中的項目2))。
- The piston end of the rod is attached to the piston by the piston pin, or wrist pin. 连杆的活塞端用活塞销或销轴安装在活塞上。
- Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation. 在差速器安装期间，安装小齿轮配合轴锁螺丝，用手紧固它，以把握住轴。
- The factory is Tappet car engine and hydraulic piston pin the specialized production enterprises. 本厂是汽车发动机液压挺杆和活塞销的专业化生产企业。
- Automobile engine factory hydraulic tappet and the piston pin of the specialized production enterprise. 本厂是汽车发动机液压挺杆和活塞销的专业化生产企业。
- The analytical results of femoral locking screw models were closely related to those of biomechanical tests with high correlation coefficient. 而生物力学实验与有限元素模拟有不错的相关系数，故可利用有限元素分析来准确预估生物力学测试结果。
- The bimetal bushing for spring bush , piston pin , rocker arm , connecting rod , cam shaft , balance shaft and other applications of bimetal bushings . 双金属轴承应用于:弹簧销;活塞销;摇臂;连杆;凸轮轴;平衡轴等部件.
- It is a special project to a permanent adhesive resin in the thread, have always solid, permanent use, absolute lock screw environmental products. 它是将特殊的工程树脂永久地粘附在螺牙上，产生永远牢固、永久使用、绝对环保的防松螺丝产品。
