您要查找的是不是：
- Study on insect-based flapping-wing system driven by piezoelectric bimorph[J]. 引用该论文 王姝歆;陈国平;周建华;颜景平.
- The gripper can sense the gripping force according to the strain at the base of the piezoelectric bimorph. 通过检测悬臂梁根部的应变信号实现对微夹钳夹持力的检测。
- Research on precise traveling positioning stage driven by piezoelectric bimorph[J]. 引用该论文 华顺明;张宏壮 程光明;范尊强;刘建芳.
- The working principle of the actuator was analyzed and the dynamic characteristic of the piezoelectric bimorph was studied by the FEM modal analysis. 分析了驱动器的工作原理，利用有限元分析软件对压电双晶片振子进行了模态分析，得到其动态特性。
- On the basis of analyzing various actuation principles, we decided to use piezoelectric bimorph as the primary actuator of our micropumps. 本文首先对各种驱动方式进行了分析，确定以压电双晶片作为主要的致动方式，并根据压电双晶片的悬臂梁模型，推导出压电双晶片的自由端位移公式。
- Using piezoelectric bimorph as actuator,a kind of new electric-pneumatic transfer device was designed based on the theory of opening-closing. 该文突破了传统的喷嘴挡板原理的转换装置,利用压电双晶片为执行器,设计了一种基于开关原理的新结构电气转换装置。
- We model the piezoelectric bimorph and get the displacement-voltage relationship and force-strain relationship theoretically. 建立了压电双晶片的复合梁模型，并对它的微位移－电压特性、夹持力－应变特性进行了数学分析。
- Performance of nozzle-flapper servo-valve driven by piezoelectric bimorph is decided in a great extend by the parameters of control system. 根据伺服阀工作特点、设计及调试的需要，以积分分离PID作为控制算法，优选了伺服阀伺服控制系统的控制参数，构建了数字控制器。
- Low, T. S., and Guo, W., 1995, "Modeling of three-layer piezoelectric bimorph beam with hysteresis", IEEE Journal of Microelectromechanical Systems, 4, (4), pp. 230-237. 冯荣丰、杨竣翔、韩长富，2003，”磁滞与摩擦力考虑的奈米定位”，物理双月刊二十五券三期。
- C. J. Morris and F. K. Forster, “Optimization of circular piezoelectric bimorph for a micropump driver, ” J. Micromech, Microeng 10, pp. 459-465, 2000. 张晋祥，压电驱动式微帮浦制作与分析，硕士论文，国立清华大学动力机械工程学系，新竹，2005
- Physical transfer function of the piezoelectric bimorph is determined through system identification from Bode diagram of the lowest two flexural resonant modes. 由压电梁最低的两个共振频率响应的波德图，以系统识别得到动态结构的转移函数。
- Low, T. S., and Guo, W., 1995, “Modeling of three-layer piezoelectric bimorph beam with hysteresis”, IEEE Journal of Microelectromechanical Systems, 4, (4), pp. 230-237. 冯荣丰、杨竣翔、韩长富，2003，”磁滞与摩擦力考虑的奈米定位”，物理双月刊二十五券三期。
- T.S.Low, and W.Guo, “Modeling of a Three-Layer Piezoelectric Bimorph Beam with Hysteresis,” Journal of Microelectromechanical Systems, vol. 4, no. 4, pp.230-237, Dec. 1995. 林得耀;以压电致动器迟滞模型为基础之控制补偿;硕士论文;国立彰化师范大学机电工程学系;2003年.
- Above all, the relation between the applied voltage, external force and tip deflection of the composite piezoelectric bimorph was inferred by the thermodynamics. 然后从热力学角度推导出复合压电双晶片悬臂梁端部挠度与外电压、外力的关系式;
- Nozzle-flapper Valve Based on Piezoelectric Bimorph 基于双压电晶片的喷嘴挡板伺服阀
- spiral-belt piezoelectric bimorph 螺旋状压电双晶片
- A microgripper with the structure of dual cantilevers is designed to meet the task of microassembly, and the microgripper is driven by two piezoelectric bimorphs. 摘要针对微装配任务设计了一种双悬臂梁结构的压电双晶片微夹钳，该微夹钳由两个压电双晶片驱动。
- The piezoelectric bimorphs of cantilever beams are used to fabricate a microgripper which is used in micromanipulation system. 摘要采用双晶片型压电悬臂梁制作一种双悬臂梁结构的微夹钳，可用于微操作系统中的微夹持器。
- Based on the driving characteristic of piezoelectric bimorphs, electric-pneumatic transfer device with new piezoelectric structure is designed. 根据压电双晶片执行器驱动特点,设计了基于压电结构的电/气转换装置。
