您要查找的是不是：
- peak load conditions 峰值负载状态
- What kind of load conditions will the server be under? 服务器将处于哪种负载条件下呢?
- Demand-side management (DSM) is an effectual means in peak load leveling. 摘要需求侧管理(DSM)是电网移峰填谷的有效手段之一。
- The peak load current limit is set by the user's selection of a reference voltage and current-sensing resistors. 用户可通过选择参考电压和电流感测电阻设置峰值载荷电流限制。
- On that peak load day, start the Perfmon log on each server at 4:00 A.M and let it run for 24 hours. 在出现高峰负载的那天,于上午4:00在每个服务器上启动Perfmon日志,并让它连续运行24小时。
- Specific performance objects, counters, and instances were collected during peak load and other observation times. 在峰值负载和其他观察期收集了特定的性能对象、计数器和实例。
- Monitor the ex2003base servers for a 24 hour period on the day that usually experiences peak load (Monday for many companies). 在通常会遇到高峰负载的那天(很多公司是星期一)连续24小时监视ex2003base服务器。
- The measured efficiency for AHB prototype circuit reaches 92.6% under low-line input and light load conditions. 非对称半桥雏型电路在低输入电压和轻载条件下，效率可达到92.;6%25。
- These pockets were characterized sometimes by low usage, but occasionally by a lack of sufficient resources to handle the peak load. 这些资源的特性是有时使用率很低,但偶尔会因为资源不足而被用来处理一些峰值负载。
- Finally, buffeting responses of the suspension bridge under forty-two kinds of load conditions are calculated. 最后计算了某悬索桥在42种荷载工况下的抖振响应。
- After analyzing the collected data, it was found that the peak load was 2,129 concurrent users averaging 18.8 Requests per second. 分析完收集的数据后发现;峰值负载为2;129个并发用户每秒平均发出18.;8个请求。
- The oil film of sliding bearing was squeezed and sheared in the dynamic load conditions. 滑动轴承在动载工作条件下运行时,承载油膜受到轴承挤压和旋转剪切两种运动作用。
- Using GM(1,1) model to predict short-period load has good accuracy, but to the high waving peak load, its accuracy is low. 用GM(1,1)模型预测短期负荷虽具有很好的精确性,但对于波动性较大的高峰负荷,它的预测精度比较低,而马尔可夫模型可以克服负荷波动较大的局限性。
- Discusses the interregional control of power distribution during peak loading. 摘要探讨了在用电峰值时段对多地区之间进行限电分配的问题。
- The parameters used in the analyses include rise to span ratio, slenderness ratio, steel ratio and load conditions. 分析的参数有矢跨比、长细比、含钢率以及加载方式。
- The load relaxation tests after peak load indicate that rockburst has two types the one is original rockburst, and the other is impellent rockburst. 对岩石峰值载荷后的松弛试验发现具有两类岩爆:一类是本源型岩爆;
- The happening of brittleness is related to the load condition. 脆性的发生和电力线路的负载状况有关；
- Weekly operational checks should be carried out at 320MW in presence of shift charge Engineer. Test should be completed before system peak load period. 每星期在值长在场的情况下，机组负荷达到320MW时，进行操作检查。测试应在系统带尖峰负荷前完成。
- The experiments show that there exists an apparent turning point before the peak load in resistance-CMOD curve of CFRC beam. 试验研究发现，峰值荷载前CFRC梁的电阻-CMOD曲线均出现明显的转折点。
