您要查找的是不是：
- Optimized Parameters of Birefringent Filter[J]. 引用该论文 张为权.
- Using these optimized parameters, the wheel shimmy motion was simulated. 使用所得优化参数对前轮摆振进行仿真。
- The optimized parameters standard of LAPD is built by orthogonal tests. 通过正交试验,建立了LAPD的最佳工况参数标准。
- We use the optimized parameters to characterize the polarization instability of a DPB SFS. 在将复行后向架构的参数最佳化后，研究其极化不稳定性。
- The optimized parameters were temperature 50 , reaction time Ih, lactose concentration 30%(w/v), pH4.5, -galactosidase concentration 0.12%. 首先通过单因素实验确定各因素对低聚半乳糖合成的影响，并通过正交实验，确定了制备低聚半乳糖的最佳反应条件为：温度50℃，反应时间1h，乳糖浓度30%25(w/v)，酶浓度0.;12%25(w/v)，pH 4
- It is demont rated that most optimized parameters for wheat seed is 1780V in separation voltage and 22.2r/mln in rollor rotate speed. 通过试验,获得了小麦种子的最佳分选电压和分选滚筒转速。
- The method of selecting optimized parameters and inserting parallel resistors is used, so the performance of the phase shifter is optimized. 采用选择优化参数和插入并联电阻的方法，优化了选取的移相器性能，并用仿真软件进行了验证。
- Based on numerical study, the optimal parameters of MTMD are given. 最后在数值分析基础上给出了MTMD最优参数。
- The good soft magnetic properties with Ms of 2223 emu/cc and Hc of 4 Oe wereobtained at the optimized parameters of P_(N2), RF-power and film thickness. 在实验条件的优化下得到了优良的软磁Fe-N薄膜,其饱和磁化强度为2223emu/cc,矫顽力为4 Oe。
- Based on the merger design theory, the transportation of the merger in PKU-ERL is designed, and the optimized parameters is given which can satisfy the demands of PKU-ERL. 摘要在交汇段设计理论的基础上，针对北京大学ERL的具体情况，对交汇段的束流传输结构进行了优化设计，通过模拟得到了满足要求的一组设计参数；
- Then through the program of the cylindrical broach, the optimized parameters are gained.Futhermore, CAD is used in the program design of the remaining parts of the broach. 采用惩罚函数法进行优化，编制优化程序，得到了优化参数，运用CAD对拉刀其他部分进行程序设计。
- Through the theoretical calculation of the bimetal hammer parameters and the practical test, a set of optimized parameters and bimetal composite hammer theory were obtained. 以高铬铸铁、碳钢为原材料,采用镶铸工艺制造高铬铸铁/碳钢双金属复合锤。
- Theory and experiment of multiple tuned mass damper are discuss in this paper. Optimized parameters for MTMD are derived. It is proved that MTMD has engineering practice value. 通过对多重调频质量阻尼器(MTMD)的理论和试验研究,探讨了TMD的个数、频率间隔、总质量比等参数的最优控制系数,得到了具有工程应用价值的结论。
- Abstract: Based on the merger design theory, the transportation of the merger in PKU-ERL is designed,and the optimized parameters is given which can satisfy the demands of PKU-ERL. 摘 要： 在交汇段设计理论的基础上，针对北京大学ERL的具体情况，对交汇段的束流传输结构进行了优化设计，通过模拟得到了满足要求的一组设计参数；
- By means of PSIM and MATLAB simulation tools, optimized parameter curves have been obtained. 通过PSIM软件对主电路进行了仿真，通过MATLAB软件绘制了各种参数曲线，有利于参数优化设计。
- In order to improve the effect of shock absorption of base-isolated structure with LRB,optimal parameters are found. 目的为了改善基础隔震结构的减震效果;实现基础隔震结构设计的可靠性和有效性;得到基础隔震结构的系统优化参数.
- The simulation model of fluid viscous speed regulator with differential gear train is established and the optimized parameters of PID adjuster are ascertained as simulating in this paper. 本文建立了差动轮系液粘调速装置的仿真模型,确定了PID控制器的最佳参数,并进行了仿真。
- At first, with the simulink of MATLAB, the feedforward neural networks went through training based on PSO in the closed-loop control system, and the optimized parameters of NN-PID are obtained. 首先借助MATLAB系统仿真工具，在闭环控制系统中通过PSO优化算法训练前馈网络，得到优化的NN-PID控制器参数；
- The groove is optimized, reconstructed and validated by means of the influence of geometrical parameter and the optimized parameter choice. 分析了刀具几何参数的影响并优化了参数选择，在此基础上，做了槽型优化和重构，并进行了验证。
- The optimal parameters for a cantilever piezolaminated beam are analytically obtained to ensure the free end displacement to remain zero. 与有限元结果比较表明：本文的理论模型能够模拟压电激励的小曲率圆形曲梁的静态响应。
