您要查找的是不是：
- normalized test signal level 归一化测试信号电平
- test signal level 测试信号电平
- VIT? Vertical Interval Test signal? 场扫描插入测试信号?
- Adults who hae a normal test result will be retested within a year. 测试阴性的成年人在一年之后进行复查。
- Dielectric loss measuring is the normal test items in electric power system. 介质损耗测量是电力系统中的常规试验项目。
- Pulse width modulation (PWM) is an analog signal level for digital encoding. 脉冲宽度调制（PWM）是一种对模拟信号电平进行数字编码的方法。
- Conclusion MGT is superior to MPT,and it can be used for normal test in cl... 结论微柱凝胶法优于凝聚胺法,可以用于临床常规检测。
- The related numerical value simulation test was conducted with five factors of the bolt diameter,bolt length,bolts spacing,bolting length and bolt pretension and four level normal test methods. 选择锚杆直径、锚杆长度、锚杆间排距、锚固长度及锚杆预紧力等5个因素、4个水平的正交试验方法进行了相关的数值模拟试验。
- The whole Chinese operating interface lets you control the state Of the roads, knowing signal level. 全中化作操作界面,让您充分掌握各种路况,讯号强弱分明。
- The normal test showed that the distribution of pigment gland was a flat curve in segregation population. 正态检验表明：分离群体色素腺体密度的分布为平阔曲线。
- On playback, the opposite process is applied (deemphasis), based on the signal level. 播放的时候，根据信号的等级应用相反的过程（减弱）。
- NRZ encoding relies on the signal level found in the timing window to determine the binary value for that bit period. NRZ编码依据时序窗中讯号位准来决定位元周期内的二进位值。
- Depending on the type of test signal involved, specific switching techniques must be used to maintain signal integrity through the switch system. 根据测试信号的不同，必须采用特定的切换系统才能够保证通过开关系统的信号完整性。
- The wafer storage section (12) transmits/receives a test signal to/from a measurement section (15) and has a hermetic and heat insulating structure. 该晶片存放单元(12)向/从测量单元(15)发送/接收一个测试信号，并具有与外界隔离的绝热结构。
- The MS is tried to hand over to cell D because it’s downlink signal level is higher that cell’s B. 移动基站尝试移交至传感器D，因为它的下行线信号水平比传感器B要高。
- NRZ) is a digital-to-digital polar encoding method in which the signal level is always either positive or negative. 非零编程(NRZ)是一种数字编码技术，在它的编码中要么正电平要么负电平。
- It is an effective method to reduce the noise in signal by wavelet, and proper parameters are selected to reduce the noise in test signal of BJ2020S road-off jeep in this paper. 利用小波良好的去噪性能,选择了合适的参数对越野吉普车BJ2020S实验测量信号进行小波去噪。
- Instructions are sent to the relays to collect testing signal sequentially. 对继电器依次发送检测指令、接收返回信息；
- A third signal level is thus now available in addition to one programmable switching point and a temperature indication. 从而得到了除可编程开关点和温度指示信号之外的第三级信号。
- The NEXT value, expressed in decibels, is computed as the difference in amplitude between the test signal and the crosstalk signal measured at the same end of the cable. 以分贝表示的NEXT值为在缆线同一末端的测试讯号和串音讯号的振幅差值.
