您要查找的是不是：
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计：基于CT的非线性有限元模型(FEM)的体内研究。
- This paper describes a 3-D nonlinear finite element model of a springboard which considers the undirectional constraint of the fulcrum. 该文采用有限元方法,建立了跳板非线性三维模型,考虑了支点的单边约束特性,对不同支点位置和踏板位置下跳板的力学特性进行了分析比较。
- This paper presents a method for developing a nonlinear finite element model to analyze the load transfer between the transtibial residual limb and its prosthetic socket. 通过建立三维非线性有限元模型来分析小腿假肢接受腔与残肢之间的载荷分布。
- nonlinear finite element modeling 非线性有限元建模
- NONLINEAR FINITE ELEMENT MODEL FOR ANALYSIS OF ECCENTRICALLY BRACED STEEL FRAME STRUCTURE ENERGY-DISSIPATION 偏心支撑钢框架耗能分析的非线性有限元模型
- nonlinear finite element model 非线性有限元
- Its finite element model is established. 构造了其有限元模型。
- Second, liear finite element analysis and nonlinear finite element analysis of the single anchorage model were both carried out. 通过线弹性分析结果与弹塑性分析结果的比较,确定了单锚模型在锚固压力下的弹性范围。
- In this paper some study on the model and the method in FBR core seismic analysis has been carried out by using a nonlinear finite element code FINAS developed by Japan. 本文以CEFR堆芯为例，主要采用了日本非线性有限元分析程序FINAS，对快堆堆芯抗震分析的模型和方法进行了研究。
- Nonlinear Finite Element Analysis of Reinforced Concrete Transferring Joints. 数字化期刊。钢筋混凝土斜柱转换节点的非线性有限元分析。
- A nonlinear axisymmetric finite element model was built to simulate position on rim,inflation and free rotation of radial tire. 建立一种子午线轮胎的轴对称非线性有限元模型,用以模拟轮胎的轮辋定位充气自由旋转过程。
- Nonlinear finite element equilibriums were solved by Newton-Raphson method. 采用牛顿-拉普森方法对非线性有限元方程进行了迭代求解。
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- By means of the nonlinear finite element analysis commercial code, MSC. 摘要利用三维非线性有限元分析软件-MSC.
- Nonlinear finite elements for continua and structures II. 连续体和结构的非线性有限元2。
- The finite element model of opening gap tantalum thin-walled tube is setup. 为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。
- A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented. 摘要使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
- A nonlinear finite element computational model for reinforced and prestressed concrete slender columns with arbitrary cross-section under axial load and biaxial bending is presented. 提出了轴力和双向弯曲作用下任意截面混凝土和预应力混凝土细长柱的非线性有限元计算模型。
- Through in-depth analysis of CWR buckling mechanism and its influencing factor, and according to the nonlinear finite element theory, the FEM model to analyze the stability of CWR track is developed. 过大的温度力会导致钢轨臌曲失稳或断裂,导致车辆脱轨,危及行车安全。
- The nonlinear finite element dynamic simulation model for an oscillation mechanism with 4-eccentric axis for continuous casting machine is established by means of the theory of kineto-elastodynamics. 根据运动弹性动力学的理论方法，建立了连铸机四偏心式振动机构非线性有限元动力学仿真模型。
