您要查找的是不是：
- The modified line contact thus achieved between rollers and raceways means that damaging edge stresses are avoided. 由此达到的滚子和滚道之间改进的线接触意味着破坏性边缘应力得到避免。
- Optional disc configuration which provides line contact between spherical disc and conical body seat. 备选阀瓣结构，在球形阀瓣和锥体阀座之间具有线接触作用。
- Secondly, the three nodes contact element obeying the elastic Coulomb friction constitutive model is presented. 并介绍了服从弹性库仑摩擦本构模型的三结点接触单元。
- The one a very short time that looks line contact that, what I excused a friend immediately is inurbane. 视线接触的一霎那，我马上就原谅了朋友的无礼。
- Additionally, the stressand displacement of contact element are analysed, and the contact condition between"soft adapter" and rockfill dam are studied. 另外,还分析了接触单元的受力、变形情况,研究“软接头”与堆石坝之间的接触情况。
- Using numerical techniques,the thermal elastohydrodynamic lubrication(EHL) in line contact under reciprocating motion was investigated. 应用数值分析方法求解了线接触往复运动工况下的热弹性流体动力润滑特性。
- The developed contact element has the ability to simulate each of the contact stage such as separation, sticking and frictional sliding. 所建立的接触元能模拟接触的各个阶段，如分离、粘附或有摩擦的滑移。
- An unequal distance multigrid method is developed to solve the thermal elastohydrodynamic lubrication of line contact problem. 使用不等距多重网格法求解了线接触热弹流润滑问题。
- For higher speeds, contact elements made of PTFE can be used. 如应用场合的速度更高,应选择用PTFE材料制造的接触件。
- Numerical analysis is carried out to analyze the influence of the electric double layer on line contact elastohydrodynamic lubrication. 摘要基于理想粘塑性模型分析了双电层效应对线接触弹流润滑膜厚度、压力分布和承载能力的影响。
- S.H .Ju.J .J Stone and Rowlands,1993”A New Symmetric Contact Element Stiffness Matrix For Frictional Contact Problems,” Computer &Structure Vol.54.No.2.pp.289-301. 黄冠伦，2007，”考虑接触效应之海底埋管有限元素分析”，硕士论文，国立中兴大学土木工程研究所。
- The line contact on a grinding wheel forms the grinding line, the workpiece lies flush with the regulating wheel and is held in place from below by a guide rail. 无心磨削时,工件外圆表面在被加工的同时还被进行引导:与砂轮的线接触形成磨削线,这时工件靠在导轮上,并被支承导轨从下面支持。
- Liu Xiaoling,Yang Peiran.Analysis of Power Law Non-Newtonian Fluid Lubricationin the Isothermal EHL Line Contact[J].Lubrication Engineering,2002 (1):5-6. [6]刘晓玲;杨沛然.;指数率非牛顿流体的等温线接触弹流润滑分析[J]
- With the multi-grid technique,a numerical solution of the power law fluid thermal elastohydrodynamic lubrication(EHL) line contact problem was obtained. 指数率流体弹流润滑问题的热效应不可忽略;与压缩功项相比,油膜能量方程中的热耗散项对温度的影响最大。
- For example, high-speed rotary machine speed fast, hot stamping and embossing line contact, higher than the temperature will round applanation or pingya. 当然，烫压工夫、烫印温度与出产效果很大水平上还受到电化铝迁徙本能机能的制约。
- Yang Ping,Cui Jinlei,Yang Peiran.Numerical Analysis of the Transient Micro-EHL of Line Contact with a Single Asperity on a Surface[J].Lubrication Engineering,2004(6):18-21. [4]杨萍;崔金磊;杨沛然.;一个表面带单粗糙峰的线接触时变微弹流润滑数值分析[J]
- The arithmetics of contact element, including three aspects of interface condition, Coulomb friction type and the weak formulation of interface condition are investigated in detail. 在接触单元的力学机理方面,从接触界面条件、Coulomb摩擦类型和接触界面条件的弱形式等三个方面对接触单元的算法进行了详细的研究。
- Line contact seal. 线接触密封。
- Node, not the intended element node. 节点,而不是所希望的元素节点。
- Is not positioned on an element node. 没有定位在元素节点上,则返回。
