您要查找的是不是：
- no box type valve body 无填料函式阀体
- Remove the body bolts from the valve body. 从阀体上拆卸阀体螺栓。
- Lift retainer and check assembly from valve body. 从阀体内取出护圈和止回阀总成。
- Screw the cover onto the valve body. 将阀盖旋在阀体上。
- Let me say this: bein` an idiot is no box of chocolates. 让我直说了吧:当一个智障者可不像一盒巧克力那么甜蜜.
- Turn handle to be perfectly perpendicular to valve body. 将手柄旋转到与阀体完全垂直的位置。
- The valve plate is made of air gasket type valve plate. 阀盘结构为空气垫型膜式阀盘。
- Remove the body bolts from valve body using Allen Key. 采用内六角扳手从阀体上拆卸阀体螺栓。
- Installation suggestion: valve body vertical and upward. 建议安装方式，阀体垂直向上。
- IMPORTANT! Flow must always be in direction of arrow on valve body. 重要提示！水流流向必须与阀体上的箭头方向一致。
- The VMR type valve is a fast opening solenoid valve that is normally closed. 一种快开快闭的燃气安全阀，是常闭型的电磁阀, 在断开的状态下弹簧作用在阀芯上以阻止气体的通过。
- In the Flat File Connection Manager Editor, in the Connection Manager Name box type Error Data. 在“平面文件连接管理器编辑器”的“连接管理器名称”框中,键入Error Data。
- Insert valve body through mounting hole and seat lugs. 将阀体插入安装孔和密封连接盘。
- ALL new exports sample, gold metal exterior, inside white plastic pillbox with 3 compartments and a round mirror. No box and packing! 全新货辨;金色金属外壳;内有白胶三间隔药盒连一面圆镜;无盒无包装.
- Press stem/ball into valve body and remove from open end. 将阀杆/球体压入阀体内，并且从开口端卸下来。
- With expert chassis of Rotary drilling rig and strong box type mast, it has high working stability. 应用徐工成熟技术制造的旋挖钻机底盘，结实的箱型臂架，具有超强稳定性；
- Any form with more than one box marked (X) in each part, with no box marked (X), with no signature or otherwise incorrectly completed will be void. 如在本表格于各部份作出超过一项选择、或未有作出选择、或未有签署、或在其他方面填写不正确，则本表格将会作废。
- The top of retainer must drop just below threads in the valve body. 护圈上方必须放置在阀门阀体螺纹以下。
- Two original rear frames are integrated into one and is installed on box type frame of pneumatic compactor by bolts. 后轮架由原来的两个变成一个，用螺栓组与轮胎压路机的箱体式车架相连。
- Slide one half of the splash guard into the groove on the relief valve body. 将防溅保护的一半滑动到安全阀阀体的沟槽上。
