您要查找的是不是：
- nitrogen plasma jet 氮等离子体射流
- The relationship of nitriding results with different nitrogen plasma fluxes was discussed. 讨论了氮等离子体流量对混合法氮化效果的影响。
- The Fe-based composite coatings on Q235 steel substrate were formed by plasma jet surface metallurgy. 采用等离子束表面冶金技术,在Q235钢表面制备了铁基合金涂层。
- The quantities of iron nitrides increase with the increase of nitrogen plasma fluxes. 而随着氮等离子体流量的增加,氮化物含量增加;
- The effect of the nitrogen plasma treatment on the adhesion property of aramid cord to rubber was investigated. 研究氮气等离子体处理对芳纶帘线表面形态及其与橡胶粘合性能的影响。
- Results show that ignition delay time becomes longer as loading density of propellants and the distance between propellants and plasma jet increase. 试验结果表明：增大装填密度以及发射药与等离子体喷孔距离，点火延迟时间变长。
- And we also observed high resolution CN Violet system and C2 Swan system in ECR nitrogen plasma. 同时，在ECR氮等离子体中，我们观测到了CN Violet system和C2 Swan system谱线系精细结构。
- The main work includes: 1.Large area high quality freestanding diamond thick films have been prepared by DC arc plasma jet CVD apparatus. 所完成的主要工作包括:1.;采用直流电弧等离子体喷射法沉积了较大面积的高质量金刚石自支撑厚膜;
- The N-S (Navier-Stokes) equations of the plasma jet were solved to calculate the gas temperature, velocity and oxygen entrainment. 三维模型通过求解等离子射流的N-S方程得出混合气体的温度、速度和氧气浓度等的分布，其中考虑了粒子与等离子射流的相互作用。
- In the experiment, GaN buffer layers have been deposited on substrates with a nitrogen plasma as a nitrogen source and TEG as a Ga source. 实验过程中,以氮等离子体为氮源,以三乙基镓(TEG)镓源,在蓝宝石(Al_2O_3)衬底上生长GaN缓冲层。
- A high-resolution, multi-line spectroscopic diagnostic system was used to detect two spectral line intensities in plasma jet simultaneously. 摘要采用一套高精度多谱线的等离子光谱诊断系统来同时探测等离子体射流中两条谱线的强度。
- A new diagnostic method using optical emission spectroscopy to determine electron temperature in inductively coupled nitrogen plasma is proposed. 本文提出了一种新的利用发射光谱测量感应耦合氮等离子体的电子温度的诊断方法。
- Nanocrystalline free-standing diamond films were deposited by 30kW DC Arc Plasma Jet CVD method on Molybdenum substrate with mixed fed gasses of Argon, Hydrogen and Methane. 在30kW级DC Arc Plasma Jet CVD(直流电弧等离子体喷射化学气相沉积)设备上,采用Ar-H2-CH4混合气体,在Mo的衬底上沉积出纳米金刚石自支撑膜。
- Because of the outstanding quality, high efficient, low cost, and the wide raw material sources, plasma jet surface metallurgy will has a potential in market competition. 由于等离子束表面冶金技术具有突出的优质高效低成本综合优势，且涂层原料来源广，在市场竞争中具有潜力。
- The relationship of nitriding results with different laser energy densities, different nitrogen plasma fluxes and different scanning speed was discussed, respectively. 讨论激光功率密度、氮等离子体流量、扫描速度等参数对混合法氮化效果的影响。
- Air entrainment in plasma jet and metal particle oxidation by the entrained oxygen were investigated numerically using a three-dimensional computational model LAVA-P-3D. 摘要为了研究等离子体射流中空气的卷吸和由此引起的金属粒子的氧化，建立了等离子体喷涂的三维计算机模型LAVA-P-3D。
- In the experiment, TEGa and nitrogen plasma are used as sources of Ga and nitrogen respectively, RHEED is used as in situ monitoring to analyze quality of growing surface during the initial stages. 我们以三乙基镓(TEGa)作为镓源，高纯氮气(99.;999%25)作为氮源；
- Diamond film produced DC arc plasma jet is measured by force driven static measuring ultra micr indentation system UMIS 2000.The result shows that hardness of diamond film is related to not only crystal growth direction but also thickness. 使用力驱动静态超微压痕测量仪器（Force Driven Static Measuring Ultra Micro－ Inden－tation System ）－ UMIS－ 2000 对由直流等离子体喷射法沉积的金刚石膜进行测量。 结果显示金刚石膜的硬度不仅与晶体生长方向和晶粒大小有关，还与厚度有关。
- Multi-wall carbon nanotubes have been successfully synthesized under arc-discharge plasma jet conditions from CLR which were produced as by-products in the process of coal liquefaction without any pretreatment or adding any other additional catalysts. 另外,煤的物理、化学性质以及催化剂、水、工作气氛对碳纳米管生成和产量均有影响,其中,煤自身具有粘结性是获得纳米碳管的必要条件。
- Simulation of magnetohydrodynamics for plasma jetting on wire pinch[J]. 引用该论文 王刚华;胡熙静;阚明轩.
