您要查找的是不是：
- PTFE matrix composites were fabricated using mixing nano sized powder process and vaporizing impregnant process. 采用溶剂蒸发法和固体纳米粉末混合法制备两种工艺制备了PTFE复合材料。
- There are mainly two methods to prepare nano sized titania, uch as vapor phase process and liquid phase process. 纳米钛白的制备方法大致可分为两类,即气相法和液相法,而液相法是研究的重点和热点。
- Keywords Nano Titanium oxide Composite resin Color Translucency; 纳米;二氧化钛;树脂;颜色;相对透明率;
- The results show that the hardness of composites fabricated with vaporizing impregnant process is much higher than that fabricated with mixing nano sized powder process. 结果表明在填料含量相同时,溶剂蒸发法制备的PTFE复合材料的硬度显著高于固体纳米粉末混合法制备的PTFE复合材料的硬度;
- Addition of titanium oxide sol makes the degradation rate of DCM greater, and the conductivity will be changed. 二氧化钛溶胶的浓度和二氯甲烷的浓度对光催化的电导率的变化有一定的联系。
- The type,reaction mechanism and application of nano sized semiconductor photocatalyst are reviewed.The improvement of photocatalyst is also discussed in brief. 对半导体光催化剂的类型、作用机理、应用及其性能改进作了综合评述。
- INGREDIENTS: Snow Lotus Cohobation, Vitamin E, HA, Arbutin, Silicone Oil, Nanometer Level Titanium Oxide Powder. 雪莲纯露、维生素E、透明质酸、熊果苷、硅油、纳米级钛白粉等。
- Compared with pure PTT, the thermal stability, crystallization and tensile performance of the PTT/MMT composites are improved due to the introduction of nano sized DK2 MMT. 与纯PTT相比,由于MMT在PTT基体中达到纳米尺寸分散,PTT/MMT复合材料的热稳定性能、结晶性能和拉伸性能都得到了明显提高。
- TQ-J421(YS-J421) is an electrode covered with titanium oxide type coating for welding mild steel. 是氧化钛型药皮的碳钢焊条。焊接工艺性能良好；
- The SEM images validate that modified titanium oxide was deposited on the surface of kaolinite. SEM照片证实了改性氧化钛包覆于高岭土上。
- The The results indicate that titanium oxide films have wide band gap and better blood-compatibility than LTIC. 研究表明， 氧化钛薄膜具有宽禁带的半导体特性，血液相容性优于热解碳。
- In addition, the hydrothermal synthesis of transition metal stannate, titanium oxide and titanate have been performed. 同时，在这基金的资助下，我们还对某些过渡金属锡酸盐和二氧化钛以及碱土钛酸盐进行了研究。
- Study on FT-IR Spectroscopy and Photocatalytic Activity of Anatase Titanium Oxide Nanocrystal[J]. 引用该论文 孙丽萍;高山;赵辉;霍丽华;赵经贵.
- Titanium oxide sol was prepared using inorganic titanium salt, and was used to photo-oxidize dichloromethane(DCM) solution. 利用二氧化钛溶胶进行光催化含氯的有机物。
- Using nitrates and etylene diamine tetra acetic acid(EDTA) as raw materials, Nano size La 0.8 Sr 0.2 FeO 3 powder was synthesized by EDTA complexing Sol Gel method at lower temperature. 以金属硝酸盐和乙二胺四乙酸 (EDTA)为原料 ;用EDTA络合溶胶 凝胶法合成了La0 .;8Sr0
- The carbothermic method of preparation for titanium diboride with titanium oxide and boron oxide in an arc furnace is studied. 研究了电弧炉碳热还原氧化钛和氧化硼制取二硼化钛的方法，制备出相对纯度大于95%25的二硼化钛。
- Then, we investigated the effects of the gel-type electrolytes on the performance of dye-sensitized titanium oxide solar cell. 接著，将探讨胶态电解质系统对于染料敏化二氧化钛太阳能电池效能的影响。
- nano sized Y-type oxytitanium phthalocyanine 纳米酞菁氧钛
- Nanograde titanium oxide with ferric stearate on surface was prepared by microwave radiation with water, and the product was characterized by a series of analysis. 采用微波水热法制备了表面包覆有硬脂酸的铁掺杂的二氧化钛纳米粒子,对其微结构进行了表征。
- Sunscreens that use metallic compounds, such as titanium oxide or zinc oxide, to block, rather than absorb ultraviolet light may be the most effective when spending time outdoors. 户外活动时使用金属化合物，如二氧化钛或氧化锌，以阻止紫外线，而不是吸收紫外线可能是最有效的。
