您要查找的是不是：
- moulding pressure infiltration 模压浸渗
- High quality preforms are important for discontinuously reinforced composites made by the pressure infiltration method. 摘要采用压力浸渗方法制备非连续增强复合材料需要高质量的预制块。
- Compared with SMC, LPMC is an excellent kind of the sheet molding compound in respect of moulding pressure and equipment etc. 同片状模塑料比较表明,低压模塑料在成型压力、设备等方面具有明显的优势,不失为优秀的片状模塑料品种。
- The results indicate that the mould pressure has significant influence on the major properties of PTCR. 研究结果表明，成型压力对PTC材料的主要性能有明显的影响。
- Key technologys for a small amount AlSiC packaging hosing of T / R module，such as near-net perform， vacuum gas pressure infiltration and machining， are introduced. 本文介绍了小批量T / R组件封装外壳研制中的关键技术，如近净成型预制件技术、真空气压浸渗技术和机械加工技术。
- The strength of Mg-Li alloy can be increased by vacuum infiltration processing, pressure infiltration processing, foil metallurgy processing and powder metallurgy processing. 通过真空浸渗法、压力浸渗法、薄片冶金法及粉末冶金法都能不同程度提高镁锂合金的强度。
- Abstract： In this paper, the effect of the mould pressure on the properties of PTCR was studied. 摘 要： 研究了成型压力对PTC热敏陶瓷性能的影响。
- This process can add mould pressure to the preforms through inflating the bladder.Thus,higher fiber volume fraction can be achieved. 该工艺通过向气囊内充压,对预成型体施加一定的成型压力,从而提高构件纤维体积含量及力学性能。
- Vacuum gas pressure infiltration 真空液相浸渗
- vacuum-adjustable pressure infiltration 真空变压力浸渗
- vacuum-gas pressure infiltration 真空气压浸渗
- Tests on mould pressure for void concrete plate 空心板梁砼模板压力试验
- Bread tends to mould in damp weather. 气候潮湿时，面包容易长霉。
- The metal in the mould hardened into shape. 模子里的金属硬化成形。
- The beer comes out of the barrel under pressure. 啤酒受到压力从桶中流出。
- Our pressure vessel is licensed product. 我厂生产的压力容器是授权生产产品。
- Wet the clay a bit more before you start to mould it. 把泥再弄湿点再动手塑造。
- Loss of pressure had not registered on the dials. 刻度盘未记录压力下降。
- Air pressure forces the water through the pipe. 空气压力使水通过管道。
- What's the atmospheric pressure today? 今天的气压怎么样？
