您要查找的是不是：
- Injection molding processing conditions Drying Drying is essential for PETG prior to injection molding. 化学和物理特性:PETG是透明的、非晶体材料。
- die temperature-adjusted Parison temperature, to provide superior products blow molding process conditions. 模具是保证产品质量的关键部分，主要组成部分有：热流道，注坯模，吹塑模，芯棒等。
- molding process conditions 成型工艺条件
- Ensure and monitor molding process quality. 保证和监督注塑成型过程的产品质量.
- Ambient and process conditions are no limitation. 可靠,精却,不被工艺条件所限制。
- The english background of molding process is preferred. 有注塑英语基础优先。
- What type of molding process is used? I. E. Green, cold, etc? 使用何种类型的造型过程?
- The simulation study for crescent-moon surface of molten steel in mold is conducted with water simulating experiment and computer video according to different process conditions. 采用水模实验以及电脑影像技术,对连铸结晶器内钢液弯月面进行了模拟研究,对不同工艺条件下的钢液弯月面进行了数值模拟。
- Silicon based realease agents not permitted to use on molding process. 模压成型过程中不容许使用硅基脱模剂。
- Impeller configuration is matched to the process conditions. 搅拌桨结构与工艺条件相匹配。
- Pits are formed in the polycarbonate disk by an injection molding process. 坑形通过注塑工艺在聚碳酸脂盘面形成。
- Polyethylene (PE) model of spin one-time molding process autopoietic. 聚乙烯（PE）旋塑成工艺一次性模式成型。
- Valnes of critical air-blowing under different process conditions ar... 得出了不同工艺条件下的临界吹气量值。
- Knowledge of ceramic or plastic injection molding process, equipment and mold design is a must. 必须具备陶瓷或者塑料成型工艺、设备和模具的设计知识。
- Collect molding process data for problem analysis and process capability study, establish improvement plan. 生产过程的有关数据进行收集、分析和能力研究并制定改进计划。
- Some properties of alkaliactivated slag cement(AASC)based waste forms made by press and vibration molding process are studied. 研究了用初压成型和振动成型工艺制造的碱矿渣水泥固化体的某些性能。
- The sintering technology of polytetrafluoroethylene in its molding process is introduced. 介绍聚四氟乙烯(PTFE)材料在加工成型过程中的烧结工艺技术。
- Check product quality as soon as process condition changes. 工艺条件改变后,要及时分析成品质量。
- The strength of the wool is not appreciably affected by carbonizing if the process conditions are carefully controlled. 如果碳化工艺做到了准确控制,羊毛的强度不会受到明显的影响。
- We are quick to respond to the demands of the era in respect of forming technology, which is the cornerstone of molding process technology. 能立刻满足成型加工技术要求的成型技术的时代需求。我们深刻地认识到这个责任,通过制作更高品质的模具来不断满足客户的要求。
