您要查找的是不是：
- Solid models for injection molded parts usually have both surfacing and sketcher based features. 在两块区域之间必须有连续的曲率变化率，否则他们的反射看起来会断开。
- In the B4 design, Associated has continued their tradition of "keying" molded parts together. 在B4的设计，相关的继续他们的传统“键控”成型零件在一起。
- The case of Plastic Injection Molded Parts is described by the expression of frame. 采用框架表达法对注塑模具实例进行了表示；
- Integrated theory and computer programs are developed systemically for simulation of cooling in injection molded parts. 系统地对注塑模具的冷却过程以及制品在注塑模具内和出模后的冷却过程进行集成分析。
- In recent years compounding raw fiberglass directly into thermoplastic molded parts (LFT D) is growing rapidly in Europe and USA. 近年来 ,长纤维 热塑性树脂在线复合直接模塑制作热塑性复合材料 (LFT D)在欧洲和美国发展很快。
- The finite model of injection molded parts with microstructure region considering latent heat can approximatively forecast the cavity temperature. 采用考虑结晶潜热的微结构件注射成型有限元模型能较准确地预测制品内部温度场分布。
- The mold parts are pulled away from the object in a straight line, the pull vector. 模子沿直线方向拉出:拔模方向。
- It mainly studies the recycled material applied to SMC/BMC as fillers and the effect on properties of molded parts by the different granularity and dosage. 主要研究了玻璃钢粉碎回收料用于SMC/BMC做填料时其粒度及用量对产品性能的影响。
- The approach of case-based reasoning is utilized in the Cost Estimation for Plastic Injection Molded parts, A CBR model for system Cost Estimation is set up. 最佳答案（此答案并不代表本站观点）将基于实例的推理应用于注塑模具成本估算，构建了系统成本估算的CBR模型。
- J. A. Chang, S. C. Chen and J. C. Cin, 2006, “Rapid Mold Temperature Control on Micro Injection Molded Parts with High Aspect Ratio Micro Features”, ANTEC, pp.1275-1279. 李育云，2002，“感应加热应用于模具快速加热之研究”，中原大学，机械工程技术研究所，硕士论文。
- Firstly, the structure of injection mold is analyzed by use of GT, mold parts are classified to 4 types of ones: cavity or core, mold plate, structure and standard parts. 首先运用成组技术基本原理,对注塑模具结构进行了分析,提出了模具零件按其功用可分为型腔型芯、模板、结构件和标准件等4类零件的分类方法。
- Any of numerous synthetic polymers produced chiefly by reaction of dibasic acids with dihydric alcohols and used primarily as light, strong, weather-resistant resins in boat hulls, swimming pools, textile fibers, adhesives, and molded parts. 聚脂一种人工合成的聚合物，主要通过二元酸与二羚基醇反应产生，主要在船体、游戏池、织物纤维、黏合剂和铸件上用作轻而强硬的、防风雨的合成树脂
- Dimension of injected parts reflects the quality of injection molded parts, and plays an important role in controlling defects and final dimension of parts during subsequent debonding and sintering. 注射坯的尺寸精度反映注射坯质量的好坏,并对控制其后脱脂和烧结过程缺陷和最终产品尺寸精度起着很关键的作用。
- Our product scope includes pulp, thermoforming and injection molding parts. 我们公司现在的产品类型包括纸浆模塑、吸塑和注塑。
- The planar orientation of fibers may occur after the flow molding of GMT, which can result in anisotropy molded parts. GMT材料流动成型后玻纤在平面内发生取向 ,导致模压件呈各向异性。
- It is normal practice, therefore, to provide some means by which the molded part can be positively ejected from the core, and this chapter deals with the various methods which are used. 因此在正常情况下，应该在模腔部分提供从型芯可靠脱出塑件的方法，本章叙述的就是各种常用的脱模方法。
- Optimization of injection molding process and zero defect manufacturing of molded parts due to cavity pressure measurements? 模腔压力监测与零缺陷部件的优化注塑工艺?
- He is cast in his father's mold. 他长得和他父亲一模一样。
- He doubles the parts of a farmhand and a miner. 在这出戏里他既扮演雇农又扮演矿工。
