您要查找的是不是：
- In this paper the fracture analysis on Mode I crack in orthotropic functional gradient materials is carefully studied. 重点对含I型裂纹正交异性功能梯度材料板的应力场和位移场进行理论分析。
- Following the theory of linear piezoelectricity,we consider the Mode I crack in a piezoelectric strip using impermeable boundary condition. 基于线性压电理论,采用电绝缘边界条件,对压电板条中的张开型(I型)裂纹问题进行了求解。
- In this article,the fracture analysis on mode I crack of orthotropic functionally gradient materials is studied,under which the elastic constants changed exponentially along thickness of the plate. 文章对含I型裂纹的正交各向异性功能梯度材料板沿其板厚的弹性常数表达式呈指数函数变化时的应力-应变场进行分析。
- Mode I Crack Problem in Piezoelectric Strip 压电板条中的平面裂纹问题
- It is found that, for mode I cracks, the precision of photoelasticity technique is hi gher than that of caustic method. 以光弹性法及焦散线法的基本原理为基础,对两种方法在确定应力强度因子方面进行了比较。
- I crack the eggs for my mother . 我帮妈妈打鸡蛋。
- Keywords conformal mapping;orthotropic plate;mode I crack;fracture analysis; 保角映射;正交异性板;I型裂纹;断裂分析;
- I cracked two eggs into the frying pan. 我往平底锅里打了两个鸡蛋。
- I cracked my head on the low door-frame. 我的头撞在低矮的门框上了。
- Mode I requires Gs interface between the SGSN and MSC/HLR. 模式I需要基于SGSN和MSC/HLR之间的界面运行。
- The BSC supports network operation modes I and II. BSC支持网路运行模式I和II。
- I cracked my head on the low ceiling. 我的头撞上了低矮的天花板。
- I cracked up when I heard that joke. 听到那个笑话讓我大笑
- It is found that the size and the shape of the parabolic crack affect the mode I stress intensity factor at the crack tips. 参数分析表明轴对称抛物线曲裂纹尖端的应力强度因子与抛物线曲裂纹的尺寸和形状有关。
- It is found that the shape of the mode I plastic zone is similar to that obtained by von Mises or Tresca yielding criterion but leaning forward from the crack tip. 结果表明，与宏观断裂力学算出的塑性区形状相比，本文给出的塑性区向裂纹前方倾斜；
- While inspecting the boot, I cracked my head on the tailgate catch. 当视察靴子时， 在后挡板上我击碎了头抓住。
- I cracked the platter when I knocked it against the table. 我把盘子撞到桌子，它被碰裂了。
- Raise your head alITtle bIT and hold the saddle and smile alITtle. You look wonderful posing like that. Shall I crack the shutter? Shall I press the shutter? 女：头在抬起来一点，拿着那个鞍，笑一笑。你摆的姿势太棒了。我可以照了吗？（按快门了吗？）
- Based on the finite element method, the maximum circumferential stress and stress intensity factor near the tip of mode I V-notch added coating are analyzed numerically. 摘要基于有限元法，对添加涂层后的I型V形切口尖端附近的最大周向应力和应力强度因子进行了数值分析。
- Here, a micromechanical model is proposed to determine the opening mode (Mode I) delamination fracture toughness of a unidirectionally reinforced material. 本研究提出一个微机械模型来决定单向加强的复合材料开口式（模式一）脱层破坏的韧性。
