您要查找的是不是：
- The development and the popularization application of the VN microalloyed steels areemphasized. 强调了VN微合金化钢的研发和推广应用.
- The role of vanadium in low and microalloyed steels and the main products of vanadium microalloyed steels were introduced. 介绍了钒在低、微合金化钢中的作用以及钒微合金化钢的重点产品;
- The vanadium/niobium microalloyed steel do not show abnormal coarsening of austenite grains when it was austenitized in the te... 在渗碳温度范围内长时间保温时不会发生奥氏体晶粒的异常长大;晶粒细化也使其渗碳层的组织和性能得到改善。
- In order to lower the flow stress in the cold heading process,the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied. 为了降低冷作强化非调质钢冷镦变形的变形抗力,研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
- In order to increase yield strength of commercial microalloyed steel from 400MPa to 800MPa, grain refinement and high purity are taken into consideration. 为了将目前商业化微合金钢的屈服强度由40MPa级提高到800MPa级;拟采用超细晶粒和高洁净度的方法来提高强度和寿命.
- Through deforming and cooling test on a copper-containing Mn-Nb-Mo-B microalloyed steel,a bainitic steel with yield strength up to 800MPa was investigated. 通过对一种含Cu低碳Mn-Nb-Mo-B微合金钢进行的变形与冷却试验,研究了一种屈服强度达到800 MPa级的贝氏体钢。
- Influences of different cooling rate on the microstructure of high-Nb microalloyed steel were researched by using thermal simulation and microstructure analysis. 采用热模拟和组织显微分析方法研究了不同冷却速率对高铌微合金钢组织的影响。
- The steel properties and the technical characteristics of B microalloyed steel,electrotechnical steel and V-N microalloyed high strength steel which were continuously ca... 文章分二次发表,本次发表的内容是关于薄板坯连铸结晶器的相关技术及板坯典型裂纹的分析。
- Abstract In order to lower the flow stress in the cold heading process, the Bauschinger effect of microalloyed steel MFT8 for cold heading bolt was studied. 摘要 为了降低冷作强化非调质钢冷镦变形的变形抗力，研究了冷作强化非调质钢MFT8在冷变形过程中的鲍辛格效应。
- The new caster can produce ultra-low carbon steel,low,medium and high carbon steels,peritectic steel and microalloyed steel with the best results in product quality and productivity. 新建铸机将能够浇铸包括超低碳钢,低、中、高碳钢,包晶钢和微合金钢在内的各种钢种,不论在产品质量,还是在生产能力方面,都将达到最好的水平。
- The application of Nb microalloying technologies is beneficial to produce microalloyed steels with low production cost. 这一技术的采用降低了生产成本,为今后生产微合金钢积累了有益的经验。
- With the aid of extraction complex of C thin film,TEM and energy dispersion X-ray spectrum(EDX),the dissolve rule of Nb,V and Ti in Nb-V-Ti and V-Ti microalloyed steel was studied by isothermal holding at different temperatures and for different time. 通过萃取复形薄膜的方法,采用高分辨透射电镜和能量色散X射线光谱技术,研究了Nb-V-Ti和V-Ti微合金钢中,Nb、V、Ti的碳氮化物在不同温度和不同时间下保温时的回溶情况。
- Because of grain size fined through IGF, higher strength and toughness were obtained.Therefore, it is of great importance to the development of microalloyed steel theoretically and practically. 通过晶内铁素铁的析出，细化了晶粒，提高了钢的强度与韧性，这对非调质钢的发展具有重要的实际及理论意义。
- super-low carbon V-N microalloyed steels 超低碳微合金V-N钢
- Electropulsing was employed to treat a low carbon microalloy steel. 研究了脉冲电流对一种低碳微合金钢的组织和力学性能的影响。
- STUDY OF V-N MICROALLOYED STEEL BAR 高氮钒微合金化钢筋的应用研究
- cold hardening microalloyed steel 冷作强化非调质钢
- niobium-containing microalloyed steel 含铌微合金钢
- microalloyed steel with Nb content 含铌微合金
- sulphur-comprising microalloyed steel 含硫非调质钢
