您要查找的是不是：
- The first is the gate and now generally installed metal to metal doors are. 首先是大门，现在一般都是安装以铁制的金属门居多。
- You need a strong adhesive to bond wood to metal. 需要强力胶才能把木料粘在金属上。
- The 4 off encapsulated Piston wear pads also ensure no metal to metal contact thus providing low friction travel. 4个无密封活塞耐磨垫确保避免金属之间的接触,因此具有很小的摩擦行程。
- Gate and globe( metal to metal) seats cannot provide bubble tight shut-off. Resilient seated butterfly valves are bubble tight by design. 闸阀和截止阀（属与金属连接）阀座不具备不透气关闭的性能。
- He shook a sheet of metal to simulate the noise of thunder. 他摇动一块金属薄片来模拟雷声。
- For the valve with the metal to metal seal,there is grease injector outside of it,grease gets into the sealing face through the injector and the seat ring to have the valve up to null leak. 金属对金属密封的阀门，阀体外部设有注油脂结构，油脂通过注脂器、阀座进入阀门密封面，使阀门达到零泄漏。
- Connect black lead to metal point on car chassis. 连接黑色导线到汽车底盘的金属点上。
- He shook a sheet of metal to simulate the thunder. 他摇动一块金属薄片来模拟雷声。
- The explosions were attributed to metal fatigue. 爆裂破归因于金属疲乏。
- Move metal between accounts Pay metal to. 帐户间转帐。
- It cannot be used to bond wood to metal. 这不能把木料粘贴在金属上。
- Do not use the sharp metal to strike the batteries. 禁止用金属锐物穿透电池。
- Peel strength test is used to study the adhesive performance in dry and wet state of assembles. 剥离强度测试来定量分析钢/粘接剂/塑料之间的干和湿两种状态的粘接性能。
- You need a strong adhesive to bondwood to metal. 需要强力胶才能把木料粘在金属上。
- Metal to Metal or Bubble Tight Resilient Seats 有关金属对金属,或气密性弹性阀座
- Feature：Aluminum foil backing,good peel strength and low tack,adaptability to weather condition and extrem... 产品详细信息:特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。
- Tin is a comparatively easy metal to smelt. 锡是比较容易熔化的金属。
- Its relaxation behavior is similar to metal. 而松弛行为与一般金属材料通常具有的基本特征相似.
- Besides, the effects of different ways of addition of the initiator BPO in the copolymerization on the peel strength are discussed. 此外,还探讨了引发剂BPO的添加方式对剥离强度的影响。
- He also wears enough metal to sink a battleship. 他身上的“金属”也足够击沉一艘战舰。
