该词条未找到_海词词典

您要查找的是不是：

Poly(butylene terephthalate)(PBT)/nanoSiO2 composites were prepared by melt blending and investigated. 采用熔融共混的方法,将纳米SiO2添加到聚对苯二甲酸丁二醇酯(PBT)中,制备出PBT/纳米SiO2复合材料,对其力学和结晶性能进行分析研究。
The immiscible poly(ethylene terephthalate)/polypropylene blend (PET/PP) was prepared via melt blending. 用熔融共混法制备了聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合材料。
The reaction mechanism of PBT and SBS g GMA during melt blending was investigated. 用FTIR、WAXD、DSC、MI等方法对共混物进行了表征。
Nano-meter BaSO4 reinforced PET composite was prepared by means of melt blending. 通过熔融共混法制备了纳米硫酸钡增强PET复合材料。
Alloy of polyamide 6 and modified bismaleimide was prepared by melt blending to improve its thermal properties. 摘要将尼龙6与改性双马来酰亚胺熔融共混形成合金以提高其热稳定性能。
In this paper,the thermoplastic elastomer material used for cable has been prepared by melting blending and dynamic vulcanizing technologies. 本文利用聚合物熔融共混技术和动态硫化技术，制备了电缆工业用聚烯烃热塑性弹性体。
Nano-meter BaSO4 reinforced and toughening nylon66 was prepared by means of melt blending. 通过熔融共混法制备了纳米硫酸钡增强增韧尼龙66复合材料。
High impact and low wear Polyoxymethylene(POM) blend was prepared by melt blending of POM with copolyamide (COPA),silicone grease,oil carrier and surfactant. 将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、硅油、载油体及表面活性剂熔融混合,制备出了性能优良的高抗冲、低磨耗POM共混物。
It prepared LDPE/nano-CaCO 3 film by means of melt blending method,and studied the mechanical proper-ties of modified film. 采用熔融共混的方法制备了低密度聚乙烯(LDPE)/纳米CaCO3薄膜,并着重对改性膜的力学性能进行了研究。
Because PET and TLCP are not miscible in thermodynamics, the effect that only using TLCP to "In-situ" reinforce PET by melt blending is not clear. 由于TLCP和PET在热力学上不相容，单纯用熔融共混法，以TLCP来对PET进行原位复合增强效果不明显。
PTT blend toughened by POE and POE-g-MAH were prepared by melting blending, and the morphology, crystallization properties and mechanical properties were studied. 摘要通过熔融共混制备了POE及其马来酸酐接枝物增韧PTT共混物，研究了增韧PTT共混物的结晶性能、力学性能和形态。
The reactive melt blending of polymethylmethacrylate (PMMA) and polycarbonate (PC) in the presence of various catalysts was studied. 摘要研究了聚甲基丙烯酸甲酯(PMMA)／聚碳酸酯(PC)共混体系在各种催化剂作用下的反应性熔融共混。
The polyhedral oligomeric silsesquioxane/silicone rubber composite was prepared by melt blending method through Haake inner mixer. 采用熔体共混法制备了笼型硅氧烷齐聚物(POSS)/硅橡胶复合材料。
In the melt blending,biodegradable hyperbranched poly(ester amide)(HBP) had been performed in an effort to toughen the PLA. 采用熔融共混的方法,用生物可降解的超支化聚酰胺酯(HBP)对聚乳酸(PLA)进行增韧改性,制备出具有良好韧性的PLA复合材料。
Because PET and TLCP are not miscible in thermodynamics, the effect that only using TLCP to “In-situ” reinforce PET by melt blending is not clear. 由于TLCP和PET在热力学上不相容，单纯用熔融共混法，以TLCP来对PET进行原位复合增强效果不明显。
The method to generate compatibilizers“insitu”during melt blending in extruder using reactive polymers or functionalized polymers are described. 阐述了利用挤出机通过各种反应性聚合物或官能化聚合物在熔融共混过程中就地形成共聚物增容剂的方法。
Thermoplastic polyurethane elastomer(TPU) with chlorinated polyethylene (CPE) and CPE/HPVC (high molecular weight PVC) as modifiers was studied systematically by melt blending. 以CPE和CPE/HPVC为改性剂,用熔融共混的方式对TPU的共混体系进行了系统的研究。
In this paper,thermoplastics polyurethane elastomer (TPU)modified and toughened polyoxymethylene(POM)are investigated with Brabender extrusion melt blending. 本文选用热塑性聚氨酯弹性体 (TPU) ,用Brabender熔融挤出共混的方法对聚甲醛(POM)的改性增韧进行了研究。
High impact and low wear Polyoxymethylene (POM) blend was prepared by melt blending of POM with copolyamide (COPA), silicone grease, oil carrier and surfactant. 摘要将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、矽油、载油体及表面活性剂熔融混合，制备出了性能优良的高抗冲、低磨耗POM共混物。
In this paper, (PPC)/organoPHilic montmorillonite (OMMT) and (PPC)/organoPHilic rectorite (OREC) nanocomposites were prepared by a melt blending method . 关于PPC/层状硅酸盐纳米复合材料的老化和降解的研究尚未见报道。

今日热词