您要查找的是不是：
- melt flow burning 流动燃烧
- Affect the melt flow rate and the cooling speed. 会影响熔体的流动性和冷却速度。
- The developing process of CRM of polypropylene melt flow rate has been introduced. 介绍聚丙烯熔体流动速率标准物质的研制过程。
- The crystallinity of polypropylene with different melt flow rate (MFR) are measured by X-ray method. 用X射线法测定了不同熔体流动速率下聚丙烯材料的结晶度。
- The melt flow rate (MFR) impacting to crystallinity and properties of polypropylene (PP) was studied. 研究了聚丙烯(PP)熔体流动速率(MFR)对结晶度及性能影响。
- Melt flow through glass fiber mat during GMT melt impregnation [J].Acta Materiae Compositae Sinica, 2000, 17(3): 28-32. GMT熔融浸渍中熔体在玻纤毡中的流动[J].;复合材料学报;2000;17(3):28-32
- Besides,60/40/2/3 HIPS/lPC/PMPI/BCP showed similar melt flow rate and mechanical properties with those of 60/40/3 HIPS/hPC/BCP. 此外 ,共混物 60 /4 0 /2 /3HIPS/lPC/PMPI/BCP与 60 /4 0 /3HIPS/hPC/BCP的流动性以及力学性能也非常接近。
- The influences of die radius, load and temperature on the flow properties of FEP melt were investigated by using a melt flow indexer. 应用熔体流动速率仪考察了口模半径、载荷及温度对聚全氟乙丙烯(FEP)流动性能的影响。
- The melt flow index of the blends was increased when the content of PEEK was decreased and melt temperature was increased. 结果表明：共混物的熔体流动指数随PEEK含量的降低和熔体温度的升高而增加；
- Factors influencing the graft ratio and melt flow rate of LDPE were studied based on the melt extrusion of methyl acrylic acid (MAA)grated onto LDPE. 通过聚乙烯熔融挤出接枝甲基丙烯酸(MAA),研究了各种因素对LDPE接枝率及熔体流动速率的影响。
- The effect of screw rotation speed on the grafting level and melt flow index of the grafted product(POE-g-GMA) is investigated. 采用在熔融挤出过程中提高双螺杆挤出机螺杆转速的方法,研究了机械力引发甲基丙烯酸缩水甘油酯(GMA)熔融接枝弹性体POE的接枝反应。
- The results indicated that the melt flow prop-des and physical strength at allay were different with different bled temperature and blend proportions. 结果表明：不同共混比例与共混温度对制备的塑料合金熔体流动性、力学强度有较显著影响。
- The results showed that high quality fiber Z30S was obtained including low ash content, high isotacticity and good stability of melt flow rate. 从而使得纤维料Z30S产品的灰分降低,等规度提高;同时产品熔体流动速率的稳定性也得到了提高,获得了高品质的纤维料Z30S。
- The aim of this dissertation was to develop propylene copolymer TJPP-2027 with high melt flow rate(MFR) and impact strength. 本工作的主要目标是开发生产高流动性抗冲击聚丙烯注塑料TJPP-2027。
- The results showed the fire retardance of PP was affected not only by flame retarding agent used,but also by melt flow ability of the PP system. 结果表明,PP的阻燃性能不仅受所用阻燃剂的影响外,还与体系的熔体流动性能具有很大关系。
- The effects of the agent system on the modification were investigated by testing melt-strength,melt viscosity,the changes of melt flow rate(MFR) and gel content. 通过熔体强度、熔体黏度测试和熔体流动速率(MFR)、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。
- Function block usually is a dependency on the main profile,but it has important effect on the main profile melt flow and the quality of the profile die. 功能块在模头口模中一般是附属在主型材上，但它对主型材熔体在口模中的流动以及型材的整体质量却有着不可忽视的影响。
- The antioxidant presented excellent performance by the tests of oxidation induction time (OIT)，melt flow rate (MFR)，tensile strength and elongation when used in PP. 将该产品应用于聚丙烯中，氧化诱导期、熔体流动速率、拉伸强度和断裂伸长率测试结果表明其具有良好的抗氧作用。
- P.S.B.Zdanski, and M.Vaz, "Polymer melt flow in plane channels: Hydrodynamic and thermal boundary layers," Materials Processing Technology, Vol. 179, 2006, pp. 207-211. 黄呈福，田口品质工程方法之控制系统参数调整，国立中正大学机械工程研究所，硕士论文，民国九十年。
- Abstract:A detailed analysis was made on the mechanism of enamel melt flow and the affection of the die construction on the enamel melt in the process of enameling round wires. 软件简介：本文对漆包圆线的涂漆工艺中漆液流动机理，以及模具结构时漆液的影响进行了较详细分析。
