您要查找的是不是：
- Recycled CD Polycarbonate was toughened by maleic anhydride grafted EPDM/LLDPE through melt extrusion. 采用自制的马来酸酐接枝三元乙丙橡胶/线形低密度聚乙烯共混物((EPDM/LLDPE)-g-MAH),通过熔融共混挤出对回收光盘聚碳酸酯(PC)进行增韧。
- The mechanical property of composite of oil-extended SEBS with filler compound was studied via melt extrusion. 采用熔融共混方法研究了碳酸钙填充充油SEBS复合材料的力学性能的影响。
- Factors influencing the graft ratio and melt flow rate of LDPE were studied based on the melt extrusion of methyl acrylic acid (MAA)grated onto LDPE. 通过聚乙烯熔融挤出接枝甲基丙烯酸(MAA),研究了各种因素对LDPE接枝率及熔体流动速率的影响。
- Self-reinforced polypropylene sheets (1?5mm thickness) have been prepared using a conventional extruder and a conical die from continuous melt extrusion. 采用普通挤出机与收敛式挤出机头，通过熔体连续挤出的方法制备了厚度为1.;5mm的自增强聚丙烯（PP）片材。
- Transparent polypropylene(PP) is prepared with PP powder , nucleating agent and calcium stearate, antioxidant 1010 etc.as raw materials and by method of melt extrusion. 以聚丙烯粉料为研究对象,以商品透明成核剂和硬脂酸钙以及抗氧剂1010等助剂为原料,通过熔融共混法制备了透明聚丙烯。
- The type and content of non-halogen flame retardant were used for preparing non-halogen flame-retardant ABS by melting extrusion. 采用不同类型和不同用量的无卤阻燃剂与丙烯腈-丁二烯-苯乙烯共聚物(ABS)熔融挤出制得无卤阻燃ABS。
- Poly(vinyl alcohol)/nano-zinc oxide composite was prepared by melting extrusion in order to improve the performances of poly(vinyl alcohol)(PVA). 为了改善聚乙烯醇的性能,通过熔融挤出的方法制备了聚乙烯醇/纳米氧化锌复合材料。
- Grafting Maleic Anhydride onto LDPE with Melt Extrusion 聚乙烯熔融挤出接枝马来酸酐的研究
- The effect of MFR on the mechanical properties of PP-R pipes resin was described.The influence of MFR change during melting extrusion were analyzed in emphasis from twin-screw extruder. 分析了PP-R(无规共聚聚丙烯)管材料MFR(熔体流动速率)的变化对力学性能的影响,着重通过双螺杆挤出机研究了PP-R管材料熔融挤出过程中影响MFR变化的因素。
- The sea seemed to melt into the sky at the horizon. 在水平线处，海洋似渐渐没入天际。
- A Study on Grafting Anhydride onto Polypropylene with Melt Extrusion 聚丙烯熔融挤出接枝马来酸酐的研究
- All his support melt away when he really needed it. 在他真正需要支持时，却得不到一丝半点。
- At high pressure dry ice will melt. 高压下干冰会溶化。
- The action of salt on ice causes it to melt. 盐作用於冰而使其融化。
- Theology Study on LDPE Melt Extrusion at Conical Die with Different Angles LDPE熔体在不同角度圆锥口模的挤出流变分析
- Study on Grafting Maleic Anhydride onto LDPE with Reaction Melt Extrusion 粒料LDPE熔融挤出反应接枝马来酸酐的研究
- Melt the butter and then blend in the flour. 先把黄油融化，然後加入面粉。
- These chocolates really melt in your mouth. 这些巧克力真正是入口即化。
- Theoretical Analysis on Polymer Melt Extrusion Swell at Conical Die with Different Entrance Angles 不同角度圆锥口模对聚合物熔体挤出胀大的影响
- If you spread salt about(the ground), it helps to melt the snow. 如果你在地上撒些盐，会有助于雪的融化。
