您要查找的是不是：
- PPS/PEEK melt blend prepared by melt-blending is introduced,and the influence of a dif- ferent content of PEEK and a different size of PEEK particales on the crystallization behavior of PPS in the PPS/PEEK blend is investigated by DSC. 采用熔融共混法制备结晶/结晶共混体系PPS/PEEK,并用差示扫描量热法研究了不同PEEK含量和不同PEEK粒径对PPS/PEEK共混物中PPS组分结晶行为的影响。
- The multiwalled carbon nanotubes(MWNT) were introduced into the polymerization of amino-capped PA6 after oxidization and chloroformylation to produce PA6/MWNT masterbatch which was mixed with PA6 chip and spun into PA6/MWNT fiber via melt blend spinning. 将多壁碳纳米管(MWNT)氧化后,酰氯化处理,在氨基封端的PA6聚合时加入,制备PA6/MWNT母粒,将母粒同PA6切片熔融共混纺丝,制备PA6/MWNT纤维。
- The immiscible poly(ethylene terephthalate)/polypropylene blend (PET/PP) was prepared via melt blending. 用熔融共混法制备了聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合材料。
- High impact and low wear Polyoxymethylene(POM) blend was prepared by melt blending of POM with copolyamide (COPA),silicone grease,oil carrier and surfactant. 将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、硅油、载油体及表面活性剂熔融混合,制备出了性能优良的高抗冲、低磨耗POM共混物。
- High impact and low wear Polyoxymethylene (POM) blend was prepared by melt blending of POM with copolyamide (COPA), silicone grease, oil carrier and surfactant. 摘要将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、矽油、载油体及表面活性剂熔融混合，制备出了性能优良的高抗冲、低磨耗POM共混物。
- Melt the butter and then blend in the flour. 先把黄油融化，然後加入面粉。
- DSC STUDY ON PPS/PEEK MELT BLEND PPS/PEEK熔融共混物DSC多次扫描研究
- Poly(butylene terephthalate)(PBT)/nanoSiO2 composites were prepared by melt blending and investigated. 采用熔融共混的方法,将纳米SiO2添加到聚对苯二甲酸丁二醇酯(PBT)中,制备出PBT/纳米SiO2复合材料,对其力学和结晶性能进行分析研究。
- Blends of Estane~? thermoplastic polyurethane(TPU) and low melt point polyester were prepared via melt blending and the blend films were prepared via blow molding. 通过熔融共混的方法制备Estane热塑性聚氨酯(TPU)和低熔点聚酯的共混物,并吹制成膜。
- The reaction mechanism of PBT and SBS g GMA during melt blending was investigated. 用FTIR、WAXD、DSC、MI等方法对共混物进行了表征。
- Nano-meter BaSO4 reinforced PET composite was prepared by means of melt blending. 通过熔融共混法制备了纳米硫酸钡增强PET复合材料。
- Alloy of polyamide 6 and modified bismaleimide was prepared by melt blending to improve its thermal properties. 摘要将尼龙6与改性双马来酰亚胺熔融共混形成合金以提高其热稳定性能。
- Nano-meter BaSO4 reinforced and toughening nylon66 was prepared by means of melt blending. 通过熔融共混法制备了纳米硫酸钡增强增韧尼龙66复合材料。
- RPS,CPE,PS and PE were melt blended in a reactive extruder at different, temperature. RPS、CPE、PS、PE在不同温度下用反应式挤出机熔融共混。
- It prepared LDPE/nano-CaCO 3 film by means of melt blending method,and studied the mechanical proper-ties of modified film. 采用熔融共混的方法制备了低密度聚乙烯(LDPE)/纳米CaCO3薄膜,并着重对改性膜的力学性能进行了研究。
- Because PET and TLCP are not miscible in thermodynamics, the effect that only using TLCP to "In-situ" reinforce PET by melt blending is not clear. 由于TLCP和PET在热力学上不相容，单纯用熔融共混法，以TLCP来对PET进行原位复合增强效果不明显。
- The reactive melt blending of polymethylmethacrylate (PMMA) and polycarbonate (PC) in the presence of various catalysts was studied. 摘要研究了聚甲基丙烯酸甲酯(PMMA)／聚碳酸酯(PC)共混体系在各种催化剂作用下的反应性熔融共混。
- The curtains blend in perfectly with the furniture. 窗帘(的颜色)跟家具(的颜色)十分和谐。
- The polyhedral oligomeric silsesquioxane/silicone rubber composite was prepared by melt blending method through Haake inner mixer. 采用熔体共混法制备了笼型硅氧烷齐聚物(POSS)/硅橡胶复合材料。
- The houses seem to blend into the surroundings. 这些房子似乎与周围的环境融为一体了。
