您要查找的是不是：
- mechanically mixing process 机械混炼法
- Mildness mixing process,steady and none powder leaking. 混合过程温和、平稳、无漏粉现象。
- Numerous and extensive eddy cavities retard the turbulent mixing process. 多而大的涡流区延迟了扰动的混合过程。
- Numerous and extensive cavities retard the turbulent mixing process. 多而大的涡流区延迟了扰动的混合过程。
- The result shows that there are a distortion regime and a split regime in the mixing process. 实验结果表明：吹炼过程中，炉渣在钢液中的分布存在形变区和分裂区；
- The steel and alloy have been smelted separately,then after mixing process the composition has been fine adjusted(that is VOD process). 分别熔炼钢水及合金,合兑后简单微调成分即进行VOD操作。
- The affection of rotor speed's change on the mixing process in two,three and six nogs synchronous rotor internal mixers were analyzed and studied. 密炼机转子转速是密炼机重要参数之一,它直接影响到密炼机的生产能力、功率消耗和炼胶质量。
- The static mixer or motionless mixer, unlike hand mixing, does not add air to the mixing process, which results in an optimal mixture. 静态混合管，不需要手动搅拌，在混合过程也不需要加压，就能达到最理想的混合效果。
- One day Mr.Mays stopped at Sony to meet with a postproduction supervisor to discuss the arduous editing and mixing process. 一天，梅斯在新力停下脚步，和一名后制作业的监督人员讨论难搞的剪接与混成过程。
- Third, mixing process of foamed asphalt mixture was simulated to study how mixing and moving aggregates affected asphalt foaming. 通过模拟沥青混合料拌和试验过程，分析了拌和过程与集料对沥青混合料发泡效果的影响因素；
- The mixing process leads to the maldistribution of reactants, the size distribution of particles thus will become scattering. 均匀沉淀法制备的纳米粒子的粒径分布较窄，但由于沉淀反应在整个溶液中进行，产物的粒径大小不易控制；
- The diagrams of the stable isotope versustemperature and Cl~- content for the thermal watershow a mixing process between the deep hot waterand the local cold water. 热水的稳定同位素与温度和氯根含量的关系图说明深部热水和当地冷水的混合过程。
- This paper mainly introduced the function of the the antiscorching agent CTP and studied it influence for rubber antiscorching properties, mixing process,storage stability. 本文主要介绍防焦剂 CTP(N-环己基硫代邻苯二甲酰亚胺 )的作用 ,研究其对胶料抗焦烧性能、混炼工艺和贮存稳定性的影响。
- The result of economic cost analysis showed that a good quality unburned brick and low cost could be obtained by mechanical mixing. 经济成本分析结果表明,用机械搅拌混合方式制作的免烧砖品质好、成本低。
- The PTFE-based composites are prepared by using PTFE and several additives through mechanical mixing, cold compressing and sintering molding. 将聚四氟乙烯(PTFE)和几种添加物采用机械共混、冷压、烧结成型的方法制备了PTFE基复合材料。
- Zhang Min: “TrumpJet” flash mixing process has made possible of flash and highly efficient injection at a portion closest to Headbox, such as retention agent, sizing agent. 张岷：“创捷”瞬间混合工艺使造纸添加剂，如助留剂、施胶剂，即刻且高效地在最接近流浆箱的部位注入成为可能。
- In the mixing process of PVC powder, the influences of the amount of PVC powder in mixing, the sequence of stuffing, mixing temperature, mixing time, etc. 研究了PVC粉料在混合过程中物料的加料量、加料顺序、混合温度、混合时间等因素对PVC干混粉料质量与产量的影响。
- The POM/TPU alloy was manufactured by mechanical mixing methods.The effects on blends toughness about TPU content, kind and compatibilizer were investigated. 通过机械共混制备了POM/TPU合金,考察了TPU品种、含量以及形态结构对共混物韧性的影响。
- Tank process, double pipes process and mixing process are easy to achieve heat balance and product moisture, with low ammonia loss and steady operation. 认为槽式工艺、双管工艺和混合工艺较易解决热平衡问题,产品水分易达标,氨损失小,生产运行稳定;
- By mechanical mixing of ABS and HPVC(high polymerization degree poly(vinyl chloride))at high temperature, polymer alloys with good overall properties are prepared. 将ABS和HPVC高温机械共混,制备了综合性能好的聚合物合金。
