您要查找的是不是：
- Studied on separating retainer from matrix cemneting component in waste concrete by heat treatment and mechanical milling method. 利用热处理与机械粉碎相结合的方法进行了废弃混凝土中骨料与基质胶凝组分的分离试验研究。
- mechanical mill method 机械研磨法
- Separate retainer from matrix cementing component in waste concrete by heat treatment--mechanical milling method 热处理-机械粉碎法分离废弃混凝土中骨料与基质胶凝组分
- Go on and order and assay and build to steel mill method result make go on and expound the face,and has discussed some experience. 通过对炼钢厂推行点检定修制的三种做法的论述,介绍了经过点检、反馈信息、计划检修、处理等一系列过程。
- Some new methods, solid state reaction by mechanical milling and liquid sta... 介绍了固相反应法、液相反应原位喷雾干燥法等加工纳米结构喷涂粉材的新方法。
- The cast aluminum blocks were put together with the PTFE powder, which were mechanical milled by using a high-energy ball mill, then the remainder PTFE on the surfaces of the specimens was removed. 摘要将铸态块状纯铝连同聚四氟乙烯(PTFE)粉末放入球磨罐中进行机械球磨，除去残留于试样的聚四氟乙烯(PTFE)。
- Titanium alloy powder was prepared by rapid solidification and mechanical milling. 采用快速凝固/机械球磨法制备钛合金粉末;
- Abstract: The cylindrical milling method of divided area was proposed to improve the quality and efficiency of integrated impeller. 文摘:为提高整体叶轮的加工质量和效率，提出了分段侧铣的方法。
- A wet milling method on laboratory scale was employed to isolate starches from 18 corn hybrids, and their phosphates were prepared. 摘要采用湿法在实验室条件下提取18种玉米杂交种淀粉，并制备了磷酸酯淀粉。
- Cotton cloth is made in a cotton mill. 棉布是由棉纺厂生产的。
- The photoinduced method is one of the candidated of substitute for the traditional ball milling method, which has an application prospect. 光诱导法是替代现行球磨法制备片状银粉的可选方法之一，具有较大的发展前景。
- Huang H,Ding J,McCormick P G.Microstructural evolution of 304 stainless steel during mechanical milling[J].unviersity of western Australia 10 May 1996. 郎宇平;康喜范.;超级高氮奥氏体不锈钢的耐腐蚀性能及氮的影响[J]
- The fully dense PMR PI/A1N composite materials up to 80wt % (62vol %) A1N contents are prepared successfully by the combination of PMR technique and mechanical milling. 应用高能球磨混合和PMR工艺方法，成功制得氮化铝含量达80Wt%25（体积含量达62vol.;%25）、致密的PMR聚酰亚胺/氮化铝复合材料。
- The results show that when the high-energy mechanical milling time increases, the relative density of pressed compact decreases gradually under the same compacting pressure. 结果表明，压制压力相同时，粉末压坯相对密度随高能球磨时间的延长而逐渐减小。
- Here we are in the yard of the steel mill. 这儿就是不锈钢厂的料场。
- The mill where we often labour is a paper mill. 我们经常劳动的工厂是造纸厂。
- My new car was put through the mill. 我的新车经过了检验。
- On the outskirts they passed a steel mill. 他们在郊区从一家钢铁厂前面经过。
- He is in charge of the operation of the steel mill. 他负责这家钢厂的经营工作。
- Application of mechanical mill for aluminium hydrate smashing 机械磨在氢氧化铝粉碎中的应用
