您要查找的是不是：
- We suspect that the Transfer Rate method may be under-reporting the actual maximum Transfer Rate. Let us know if you have other suggestions for performing this test. 我们怀疑传输率方法可能在报告的实际最大传输率之下。如果你有进行这项测试的其他建议,请告诉我们。
- maximum transfer rate 最大传送速率
- The resulting transfer rate is 110 baud. 最终的传输速率是110波特。
- When transfer rate reaches a specified level. 时,网络带宽在达到事先指定的等级后,就能打开警报提示了。
- The maximum wall heat transfer rates generally occur at the throat. 壁的最大热交换率通常发生在喉部处。
- Bursty Seconds Bursty seconds is a measure of the amount of time spent at maximum data transfer rate. 突发秒用于衡量最大数据传输速率传输时所需的时间总量。
- Numerical results indicate that there is an optimum mass fraction of multiple PCMs for the LTES system to reach the maximum heat transfer rate. 结果表明,对于组合式相变材料储热系统,存在着最优组分配比,使得系统的储热性能达到最佳。
- If you are experiencing a slow transfer rate, click here to find out why. 如果你的传送速度很慢,按一下这里找出原因。
- This article describes how to change the Point-to-Point Protocol over Ethernet (PPPoE) Maximum Transfer Unit (MTU) size. 本文介绍如何更改PPPoE最大传送单位(MTU)大小。
- The test proves that virtual cdrom library has higher data transfer rate. 实验结果表明:虚拟光盘库具有较高的数据传输速率。
- Full-motion, digitized and uncompressed video requires a data transfer rate of roughly 270M bit/sec. 全活动、数字化和未压缩的视频需要大约270兆位/秒的数据传输率。
- Full-motion,digitized and uncompressed video requires a data transfer rate of roughly 270M bit/sec. 全活动、数字化和未压缩的视频需要大约270兆位/秒的数据传输率。
- Maximum External Data Transfer Rate 最高外部传输速率
- A single spindle should yield a transfer rate of approximately 30 small messages per second. 一个心轴应能实现大约每秒30封小邮件的传输速率。
- Transfer Rate Calculate how long to transfer a file at different baud rates. 计算不同速度下传送一个文件需要花费的时间数。
- To achieve the optimum transfer rate, however, few checks are performed regarding data formatting. 但是,若要获得最佳的传输速率,应执行几个有关数据格式的检查。
- Maximum Internal Data Transfer Rate 最高内部传输速率
- The results indicate that the larger diameter of thermosyphon is the better to the enhancement of heat transfer rate. 结果表明：大管径的热管对于提高热管的传冷量是有利的；
- The Linear Driving Force (LDF) model is applied to describe the mass transfer rate. 模型同 时考虑了吸附 与解吸过程中的热效应，引入了能量平衡方程。
- The heat transfer rate increases extremely quickly causing the water system temperature to overshoot. 快速增加的热量导致水系统出现过热。
