您要查找的是不是：
- maximum strain energy theory 最大应变能理论
- THE DEVELOPMENTS FOR THE THEORY OF BELTRAMI-HAIGH MAXIMUM STRAIN ENERGY PER UNIT VOLUME AND ITS APPLICATION 对Beltrami-Haigh最大总应变能理论的改进及其应用
- critical shear strain energy theory 最大剪应变能量理论
- the maximal strain energy theory 最大应变能理论
- In this paper,the maximum circumferential strain fracture criterion is proposed with a comparison of the maximum circumferential stress criterion and the strain energy density theory. 根据线弹性断裂力学，推导出了复合型裂纹的最大拉应变断裂准则，并与最大拉应力理论、应变能密度因子理论作了比较、分析；
- It was analysed by a strain energy method. 这是用应变能力方法解决的。
- strain energy theory 应变能理论
- The proof was based on the nonnegativeness of the strain energy. 这种证明根据的是胁变能量的非负性。
- The strain energy density function equals the Helmholtz. 应变能密度函数等于亥姆霍兹函数。
- This paper deals with the strain energy linear ductile arrester by using theory of plasticity. 本文对线性塑性应变能缓冲器进行了理论和实验研究。
- Range represents the maximum strain which can be recorded without resetting or replacing the strain gage. 量程表示无需重调或重装应变计就能记录到的最大应变。
- LCF life could be well expressed by plastic strain energy. 低周被劳寿命可由塑性应变能表达。
- The rock strain energy derived from two-phase medium theory consists of pore strain energy and frame straln energy. 由双相介质理论导出的岩石变形能由孔隙变形能和骨架变形能两部分组成。
- maximum strain theory of failure 最大应变破坏理论
- It points out that the position of the maximum strain, stress and tension is at first group trough type roller, not at passing poion of pulley if the head drum works as pulley. 指出在头部滚筒作为驱动滚筒的布置系统中，胶带最大应变、力及张力位置不在驱动滚筒相遇点，而在过渡段第一组槽形托辊处。
- Using the theory of continuum mechanics, strain energy density function of sponge rubber material is founded based on Ogden model. 海绵橡胶是密封条的重要组成部分,是一种可压缩的大变形非线性弹性材料。
- Accordingly, Stress Triaxiality, Strain Energy Density Factor and Maximum Circle Tensile Stress near the crack tip and their variation due to the circle angle variation can be derived. 根据内部裂尖附近的位移分量和应力分量可以得到裂尖的应力三维度,应变能密度因子以及裂尖附近的最大周向拉应力随着圆周角的变化而变化的情况。
- The total strain energy of laminated shell is deduced by means of Ritz method. 接着本文研 究了非对称正交层合壳的固化变形特性。
- The maximum strain of the system is reduced grentiy under this suitable function, and tbe maximun shaking force, shak-ing moment and torque are reduced in tbe meantime. 在此输入转速函数下，机构最大应变大为减小；同时，机构的最大震动、动力矩及输入扭矩也有相应减小。
- Derived results are able to reflect the influence of the quality of a material to them,compared with the result from the shear strain energy strength theory. 导出的结果与由剪切应变能强度理论得来的结果相比,能够反映材质的不同对疲劳极限条件的影响。
