您要查找的是不是：
- Experimental results show that there are ductile removal and brittleness removal simultaneously, and the model can analyze qualitatively the material removal ratio in dual-lapping of sapphire. 结果表明，蓝宝石双面研磨中同时存在延性去除和脆性去除，该模型可以定性地描述双面研磨加工材料的去除率。
- material removal ratio 材料去除率
- And COD removal ratio in US-VMD process is superior to that in VMD process. 同时;超声波-减压膜蒸馏组合技术较减压膜蒸馏过程有更大的COD去除率.
- Scraps or material removed when something is trimmed. 剪削，废料从被修剪的东西上掉下来的碎屑
- Floationg material removal of semi clean water and sewage, waste, dirty water. 用于去除生活用下水,废水,污水中的浮游物质。
- CODCr removal ratio of DSD acid reduction wastewater was over 74.7% at appropriately operating conditions. 通过树脂选型确定出大孔弱碱性阴离子交换树脂D301R;其对废水COD_(Cr)的去除率可达74.;7%25。
- The material removal volume of wear-resisting cast steel,when ground with the electroplated CBN tools made with ... 在电镀过程中,应严格控制CBN活化表面钯质点的数量,使其保持在合适范围内,避免CBN颗粒相互粘结和成块现象。
- Cumulative removal ratio of nitrogen was closely related with nitrogen concentration，working time and biomass of periphyton. 附着生物对水柱中氮的累积去除率和水柱中氮的浓度、附着生物的生物量以及附着生物作用时间密切相关。
- The result indicated that the material removal rate of isopulse generator is over 20% higher than that of general pulse generator. 实验结果表明，与普通脉冲电源相比,等能量脉冲电源可以提高加工效率20%25以上。
- According to the inspection of Shanghai KAKON (Japan-based) Inspection &Testing Services Co., Ltd., its removal ratio of deodorization is up to 60%. 经上海科恳（日本）检测：除异味性能减少率达到60%25。
- The CODCr level in the raw wastewater is high to 1000 mg/l, the CODCr removal ratio of 30% by bio-membrane process alone was gained formerly. 制浆造纸废水对环境的污染危害以化浆系统洗、选、漂工段排出的混合废水(亦称造纸中段废水)最为严重。
- The dominant material removal mechanisms in grinding of PCD are abrasive wear, fragmentation, thermal-physics and thermal-chemical process. PCD材料去除主要是通过磨粒的机械磨耗、破碎作用和热物理、热化学作用等方式。
- This paper proposed a viewpoint to explain why vibration assistance may increase material removal rate (MRR) in vibration-assisted finishing process. 摘要讨论振动研磨加工过程中通过辅助振动提高材料去除率的原因。
- Experiment results showed that WEDM in atmosphere offers advantages such as better straightness,shorter gap length and higher material removal rate. 实验结果表明,气中加工的直线度好、放电间隙窄、加工速度(材料去除率)高。
- When the microorganism maturing, a steady state stable Fe/ Mn removal ratio excess99% has been obtained, which is better than the requirement of the national standard. 生物滤层培养成熟后,滤池铁锰去除效率达99%25上,出水水质优于国家标准,取得了稳定的运行效果。
- Experiment results showed that WEDM in atmosphere offers advantages such as better straightness and higher material removal rate. 实验结果表明,气中线切割加工具有加工表面直线度好、加工速度(材料去除率)高等优点。
- The simulated waste water containing Cd2+or Cr6+ was treated with CTA-CMCTS as flocculating agent. The removal ratio of Cd2+and Cr6+ may reach 99.7% and 94.4%,respectively. 以CTA-CMCTS为絮凝剂处理含Cd2+或含Cr6+模拟废水时;Cd2+和Cr6+的最大絮凝去除率分别可达99.;7%25和94
- Thus, it is concluded that the collision and shearing actions caused by the radial flowing of slurry play a dominant role in material removal in FJP. 该现象说明，抛光液中磨料粒子的径向流动对工件产生的径向剪切应力是材料去除的关键。
- Both high material removal rate(MRR) and smooth surface have to be achieved in primary chemical mechanical polishing(CMP) of hard disk substrates. 硬盘盘基片粗抛光必须在较高材料去除率的基础上获得高表面质量。
- Larger diamond crystals and greater diamond protrusion will result in a potentially faster material removal rate when there is enough horsepower available. 金刚石晶体和金刚石突较大将导致更大更快的物质可能有足够的去除率马力刊物。
