您要查找的是不是：
- However,for frame-shaped components with thin walls(FSCTW),SF has a great effect on the machining deformation because of the poor rigidity. 但是,对于航空薄壁件来说,由于其结构刚性差,装夹方式不当易引起较大的加工变形,从而影响到其加工精度。
- Compared the simulated data with that in the experimentation,it can be drawn that the machining deformation in the milling process reduced if the residual stress remaining in the... 通过仿真数据与实验数据相比较,结果表明:工件毛坯残余应力在铣削加工过程中对称释放有利于减小工件加工后变形。
- Machine deformation small, rigid, and improve the accuracy of processing is extremely beneficial. 机床变形小，刚性好，对加工精度的提高极其有利。
- Analysis and Simulation of Machining Deformation Resulting from Residual Stress 残余应力对加工变形影响的分析与模拟
- Framework Part Machining Deformation Research Based on Residual Stress in Blank 基于毛坯残余应力框类零件铣削加工变形研究
- Analysis on Machining Deformation of Semi-circle Thin-wall Parts and Countermeasures 对半圆薄壁件加工变形分析及对策
- Machine Deform Control of Thin-wall Cylinder Welding Hardware 薄壁筒形焊接件加工变形控制
- Ice crystals begin to deform measurably. 冰晶就产生某种程度的变形了。
- Hobbing Accuracy Influenced by the Velocity of the Machine Deformation 机床变形速度对滚齿加工精度的影响
- Normally, enormous deformation is abnormal. 通常，巨大的变形是不正常的。
- Inspection machining dimension of rudder pintle. 舵销机加工尺寸检查。
- Outside the strip zone, deformation is elastic. 在窄带区以外，变形是弹性的。
- Plastic deformation under spherical indenter. 球形压头下的塑料变形。
- It will deform into an elongated blob. 它会变形而成为一个拉长了的滴状体。
- Severe variations deform the discharge curves. 严重者使放电曲线发生畸变。
- Machining, lapping to close tolerances is easy. 比较容易达到机加工和抛光精度。
- Applied stress causes plastic deformation. 外加应力引起塑性形变。
- During deformation, the ferrite grains nuc... 碳含量提高有利于铁素体晶粒细化。
- She appeared to deformation of the face. 她出现了能变形的面孔。
- High Speed Machining Strategy of a Blow Mould. 饮料瓶吹塑模镶块的高速加工策略。
