您要查找的是不是：
- Outer ring with integral central flange and two loose flange rings. 外圈带整体式中心法兰和两个松配合法兰圈。
- Joint type of this valve is flange joint. 本阀连接方式为法兰连接。
- One integral flange and one loose flange ring on the inner ring. 内圈带一个整体式法兰和一个松配合法兰圈。
- One integral flange on the outer ring and one loose flange ring. 外圈带一个整体式法兰和一个松配合法兰圈。
- Press bending joint, flange joint and air spring end plate. 扣压弯曲接头，法兰接头和空气弹簧接头。
- Two outer rings each with a central integral flange and two loose flange ring; one intermediate rings. 两个外圈分别带一个中心整体式法兰和两个松配合法兰环;一个隔圈。
- The bearings have two loose flange rings on the outer ring, a flangeless inner ring and four rows of rollers (fig 1) or eight rows of rollers (fig 2). 这些轴承外圈上有两个松配合法兰圈,还有一个不带法兰的内圈和四列滚子(图1)或八列滚子(图2)。
- The flange joint is a common connection form of high-rising steel tower structure, and bolt looseness of flange is the damage with facilitated occurrence in the structure. 摘要法兰连接是输电线塔等高耸钢结构中常用的一种连接方式，法兰处螺栓的松动是结构容易发生的损伤。
- The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring (fig 5). 外圈有两个整体式法兰,内圈有一个整体式法兰和一个松配合法兰圈形式的非整体式法兰(图12)。
- And a gasket, matching the elastomeric valve seals, is installed in the bottom flange joint, regardless of attached valve type, in order to seal external fluid from the housing interior. 为了密封外壳，使得流体不会从外壳内泄露出来，需要一个与阀门弹性密封相配的垫圈，安装在底部法兰连接件里，而无论所连接的阀门是什么类型。
- height of protrusion in flange joint 法兰连接凸出部分高度
- Used in flange joint of heat exchanger 系换热器法兰联接用垫片
- Used in flange joint of normal pipe vessel 系一般管法兰和容器法兰联接用垫片
- Through adjusting gasket structure, its mechanical performance is changed to consist with request of bolt, so that flange joints can meet the standard of sealing request. 通过垫片工艺结构的调整,使其力学性能与紧固件的要求一致,使法兰接头符合操作时的密封性。
- FLANGED:There are several steps to follow to make sure that a flanged joint will be properly assembled. 法兰连接:为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- There are several steps to follow to make sure that a flanged joint will be properly assembled. 为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- Bind the rope fast lest it should come loose. 把绳子绑牢，免得它松脱。
- Valves are to be of the pneumatically operated jacket pinch type with integral flanged joint ends. 阀门是气动操作套管夹紧类型，带整体法兰连接装置。
- All that is required is two gaskets in place of the one normally used in a flanged joint. 只需用两个垫圈替代通常用在法兰接头上的一个垫圈即可。
- The tractor has make deep furrow in the loose sand. 曳引机在松软的沙土上留下了深深的车辙。
