您要查找的是不是：
- longitudinal shearing test 纵向剪切试验
- Touch and close fasteners - Determination of longitudinal shear strength. 粘接拉链。纵向剪切强度的测定。
- Standard compaction test and undrained direct shear test were carried out. 实验方式是采取标准压实试验及不排水直接剪力试验。
- HY/PA can improve not only the transverse shear strength of CF/PA but also the longitudinal shear strength of KF/PA. 另外,HY/PA在改善CF/PA的横向剪切强度的同时,也改善了芳纶纤维增强尼龙复合材料(KF/PA)的纵向剪切强度;
- The load carrying capacities of steel deck concrete composite slabs are governed by the longitudinal shear strength. 压型钢板-混凝土组合楼板的承载能力受楼板叠合面的纵向抗剪能力控制。
- Longitudinal shear problems of collinear periodical rigid line inclusions at the interface of dissimilar materials were dealt with. 摘要研究了不同材料界面含周期刚性线夹杂的纵向剪切问题。
- Shearing test on 72 cube specimens with cutting groove bonding has been done, and the experiment results are given and have been analyzed. 摘要对72个沟槽式新老混凝土粘结试件进行了抗剪试验，给出了试验结果，并对其进行了分析。
- The paper deals with the main points in the design and the principles of on rollTension mechanism in a hydraulic transmission system used in 650 Longitudinal shearing set. 论述了650纵剪机组“开卷-张紧”装置液压传动系统的原理及设计要点，并指出了在实际应用中该系统的调试方法。
- Variation Rule of Shear Strength Index When Direct Shear Test of Coarse-grained Soil. 粗粒土直接剪切试验抗剪强度指标变化规律。
- It is presented an experimental study on the bond behavior of NSM CFRP strips using a simple shear test set -up. 通过CFRP板条嵌入混凝土试块的界面单剪试验,研究粘结长度对界面粘结性能的影响。
- Finally based on the analyzing of shear test data, classification and development pattern, this paper puts forward an index value of shearing strength. 最后在分析抗剪试验资料和分类及发育规律的基础上，提出了抗剪强度指标的建议值。
- Simple shear test shows that there is a shear zone in soil nearby the contact surface, in which the shear dilation/compression effect exists during shearing. 接触面单剪试验显示，在土与结构接触界面土体一侧存在剪切错动带，剪切过程中的土尤其是粗颗粒土出现明显的剪胀/剪缩效应。
- Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic. 最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
- The characteristic values of micro shear test and tensile test of aluminium alloy were determined and the quantitative expression of these characteristic values were studied. 通过测定铝合金微型剪切试验和拉伸试验的性能参数,研究得出了这些性能参数之间的数学关系式。
- The interlaminar shear strength of the composites was characterized by a short beam interlaminar shear test and a double edge-notched tensile shear test. 短梁剪切失效模式为假塑性，而拉剪失效模式为非假塑性破坏。
- At present, the conventional rock body mechanical test comprises a unidirectional compression test, a unidirectional tension test, a triaxial compression test and a shear test. 目前常规的岩体力学试验主要有单向压缩试验，单向拉伸实验，三向压缩试验，和剪切试验等。
- M.Mahaney, M.Shell, R.Storde, 1991, Use of the in-process bond shear test for predicting gold wire bond failure modes in plastic packages, IEEE IRPS, pp44-51, 1991. 陈永庆，2005，应用反应曲面方法求解封装焊线制程微细间距之最佳参数，硕士论文，国立中原大学，中坜。
- longitudinal shear force redistribution 纵向剪力重分布
- longitudinal shear stress in beam 梁内纵向剪应力
- First, use the he red clay original condition and the rebuilding condition separately to carry on the single axle solidifying compression test and the three axle shear test. 首先,分别对红粘土原状样和重塑样进行单轴固结压缩试验和三轴剪切试验。
