您要查找的是不是：
- The title of waterborne epoxy coatings was synthesized by blend of a modified room temperature curing agent(TETA) for self-emulsified epoxy resin and a low M_n liquid epoxy resin. 通过对环氧树脂室温固化剂三乙烯四胺进行封端、加成、成盐等一系列改性,制得自乳化水性环氧树脂固化剂;与低相对分子质量的液体环氧树脂混合后,获得了水性环氧树脂涂料。
- liquid epoxy coating 液体环氧涂料
- It's a three components improved epoxy coating. 为三组份改性环氧涂料。
- It's a two components improved epoxy coating. 为双组份改性环氧涂料。
- It's a two-component epoxy coating. 为双组份环氧涂料。
- It's a two-component amine adduct cured epoxy coating with special conducting electrostatic materials. 是一种由特种导静电材料组成的双组份胺加成固化的环氧涂料。
- Other project: Repair & maintenance, ductwork of water & power, epoxy coating ground, loading & unloading, emergency labor service etc. 零星工程：维修、保养、水强弱电、环氧地平、起重搬运、劳务应急输出等。
- The influence of the amount of liquid polysulfide rubber on the adhesion,flexibility and preparation technology of epoxy coatings are studied. 通过选择合适的环氧树脂、填料、溶剂等制备了环氧厚涂层涂料,对比了不同添加量的液态聚硫橡胶对环氧厚涂层的附着力、柔韧性以及工艺的影响。
- For the coating performance in the underground water, the rust inhibitor primer is superior to the epoxy coating. 以涂装对铅管在地下水中的保护性而言，抑锈底漆涂装优于环氧树脂涂装系统。
- CER-228 is a low-molecular-weight bisphenol-A epoxy resins, liquid epoxy resin used as a reactive diluent, the product has a good water-resistant, heat resistant and chemical properties. CER-228是低分子双酚A型环氧树脂，用作液体环氧树脂活性稀释剂，该产品具有良好的耐水蒸气，耐热及耐化学品性能。
- Corrosion resistant cylinder construction includes epoxy coating on the head, cap and gland, all of which are cast iron. 耐腐蚀的缸体结构包括在顶部、盖和密封装置上增加环氧涂层，并且全为铸铁材质。
- Epoxy Coating and Lining: Epoxy resin is applied after the internal surface treatment is completed in accordance with SA2 1/2 requirement is completed. 环氧涂层与衬里： 内表面按SA2 1/2规定处理完后涂环氧树脂。该工序遵守卫生条例及AWWA C-210标准。**我们还使用煤焦油搪瓷涂层、煤焦油环氧涂层。
- The composition of flake zinc powder based of heavy duty anticorrosive epoxy coating was described, and function of each composition was introduced. 讨论了鳞片状锌基环氧富锌涂料的组成，各组分的作用以及涂料的配方设计。
- Technical standard of liquid epoxy internal coating for steel tank 钢制储罐液体环氧涂料内防腐层技术标准
- At last the merit and index of anticorrosive epoxy coatings were discussed. 介绍了锌基环氧富锌涂料的主要优点、使用范围并对其指标进行测定。
- The formation of anticorrosive epoxy coatings was described as well. 分析了鳞片状锌粉的特点并对其主要性能指标进行测定。
- Carbon channel is usually finished with electro-galvanization. Hot dipped galvanzined finish or epoxy coating or nigrescence is also available on special order. 碳钢型钢的表面处理普通为电镀,如需热浸镀锌、喷塑、发黑等要在订货时说明。
- The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS). 利用电化学阻抗谱(EIS)技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。
- Carbon channel is usually finished with electro-galvanization.hot dipped galvanzined finish or epoxy coating or nigrescence is also available on special order. 碳钢型钢的表面处理普通为电镀，如需热浸镀锌、喷塑、发黑等要在订货时说明。
- By formation of epoxy coating on n-dodecanethiol self-assembled monolayer on copper substrate, self-assembled monolayer was introduced between epoxy coating and copper electrode. 通过在正十二硫醇自组装单层膜表面制备环氧树脂涂层的方法,在涂层/铜基体界面引入自组装界面层。
