您要查找的是不是:
- linear heat generation rate 线功率
- Heat generation rates may be input as element body loads at the nodes.If the node I heat generation rate HG(I) is input, and all others are unspecified, they default to HG(I). 温度加载也是如此,若你只是在某些节点上定义了温度值,而其他节点不定义加载的话,其他节点的温度值将默认和这些温度相同。
- Optimal Power Output and Entropy Generation Rate for an Endoreversible Carnot Cycle in the Case of Another Linear Heat Transfer Law 另一类线性传热时内可逆卡诺循环的最优功率与熵产率
- heat generation rate 发热率
- The rate of curing and consequently the rate of heat generation increase with the temperature. 固化速度,因而还有放热速度,都随温度而增加。
- There is some about that retarders or retarding plasticisers really alter the total heat output or, for that matter, the rate of heat generation. 无疑地,缓凝剂或缓凝塑化剂确实改变了点总放热量或放热速度。
- Derivation of Calculation Formule for the Heat Generating Rate and the Helium Generating Quantity of ~(241)Am-Be Neutron Source ~(241)Am-Be中子源发热率和氦气生成量计算公式的导出
- Re-arming capacity is a significant factor in sortie generation rate. 重新装弹能力对于出勤率而言是一个重要影响因素。
- It has low heat generation load, low temperature and of high-stability! 负载发热量小,设备系统温度低,稳定性好!
- He is generally rated as one of the best modern writers. 他被公认为现代最杰出的作家之一。
- Heat: A small amount of heat generated in the reaction. 热:反应产生了小量的热。
- The stress distribution in greenware was analyzed and the effects such as linear heating rate, holding time heating, mass loss rate controlled program on the stress was investigated. 结果显示,生坯内气体压力、径向应力、切向应力分布呈现中高外低分布,径向应力在生坯表面为零,而切向应力在表面不为零。
- In this thesis, a numerical and linear heat source integrated model (NLIM) was developed by analyzing the unsteady heat transfer of vertical embedded pipes for ground source heat pump, and integratin. 本文通过对地源热泵换热器地下竖直埋管非稳态传热分析,综合数值模拟和有限长线热源模型求解的特点,提出了数值计算与有限长线热源综合模型(数值线源综合模型)。
- Compare with group A, generation rate of AIF declined obviously in the elders in group B (10.53%,P<0.05). 与A组比较;B组老年患者肠道菌群失调发生率明显下降( 10 5 3%25 ;P <0 0 5 )。
- It did not furnish an explantation for the heat generated by friction. 它未能圆满地解释因摩擦而产生的热。
- The influence of air Relative Humidity and mass flow on dust generation rate was determined. 通过实验主要测定空气湿度和质量流量对粉尘产生率的影响。
- A specially designed inner ring chamfer improves oil flow into the bearing for better lubrication and lower heat generation. 有特别设计的内环倒角提高石油流入轴承进行更好的润滑和低热量的产生。
- The cool type series uses forced cooling fluid that, when passed through the nut, minimizes heat generation and thermal expansion. 凉爽型系列采用强制冷却液,当通过螺母通过,最大限度地减少热量的产生和热膨胀。
- When the nickel anode was in the passivation state, there yielded chlorine gas on the anode and the generation rate of the alkynol oxides was faster. 当镍阳极处于钝化状态时阳极上有氯气产生,炔醇类氧化物的生成速度较快。
- It did not furnish an explanation for the heat generated by friction. 它未能圆满地解释因摩擦而产生的热。