您要查找的是不是：
- Keywords light alloy sheet;gas forming process;superplastic; 轻合金板材;气压成形工艺;超塑性;
- light alloy sheet 轻合金板材
- Most of the machine parts available here are made from a new kind of light alloy. 这里采用的大多数机器部件都是由一种新的轻合金制造的。
- Study on Salt Spray Corrosion of Two Kinds of Aviation Light Alloys Sheet and Their Laser-welded Joints 航空轻质合金及其激光焊接头盐雾腐蚀行为研究
- The superstructure is constructed in marine grade light alloy. 上层结构由轻型合金构成。
- Salt water corroded the light alloy frames and the fabric wing-covering. 盐水对轻合金飞机构架和布质机翼蒙皮有腐蚀作用。
- MATERIAL: enclosure in light alloy, external stainless steel bolt and screws. 材质:箱体是轻型合金,外部螺钉和螺杆是不锈钢。
- GENERAL DATA: Enclosure in light alloy with stainless steel bolts and screws. 箱体的材质是轻型合金,螺钉和螺杆是不锈钢。
- AZ31 magnesium alloy sheet were prepared by equal channel angular rolling(ECAR). 采用等径角轧制工艺制备了AZ31镁合金板材。
- The forming limit of 3A21 Aluminum alloy sheet was tested and the forming limit diagram (FLD) was determined. 通过标准成形极限实验获得3A21铝合金板材的成形极限图(FLD)；
- AZ31 magnesium alloy sheet with good shape and formability is fabricated by warm cross rolling. 通过温热交叉轧制工艺制备了板形以及成形性能良好的AZ31镁合金薄板;
- The results show that there is strong basal texture in the rolled AZ31 Magnesium alloy sheet. 结果表明，经过轧制之后的AZ31镁合金板材形成强烈的基面织构；
- GENERAL DATA: Enclosure in light alloy with external bolts and screws in stainless steel. 箱体的材质是轻型合金,外部螺钉和螺纹是不锈钢。
- Complete ODF analysis is thus made for the texture of a cold-rolled TA7 titanium alloy sheet. 按此法对实测的冷轧TA7合金板材完整ODF施行织构分析。
- It is not possible to make this light alloy by melting the small part of copper and then adding the much larger part of aluminium. 在炼这种轻质合金时，就不能先熔小部分的铜，再加进大部分铝。
- GENERAL DATA: Enclosure in light alloy with external bolts and screws and accessories (hammer, chain, glass stop ring, etc.) In stainless steel. 箱体的材质是轻型合金,外部螺钉和螺杆、附件是不锈钢,(铁锤、铁链、玻璃环等)
- Based on the preliminary study on LSF(Laser Shock Forming) both at home and abroad, the LSF of titanium alloy sheet is studied. 本文在分析了国内外激光冲击成形研究现状的基础上,对钛合金板激光冲击成形进行了实验研究。
- Solid cages for SKF bearings are made from brass, steel, light alloy, polymer or fabric reinforced phenolic resin (fig). SKF轴承用的实体保持架是用黄铜、钢、轻合金、尼龙或纤维增强酚醛树脂制造的(图7)。
- The boxes of this series are used for pulling and joining conductors. Constructed in anticorrosive light alloy and supplied with flat cover. 这种接线盒用于拉伸和连接电线。接线盒由防腐蚀的轻型合金制成,盒子外带有平盖。
- It comes with 18-inch AMG light alloy wheels, a sports suspension, two-tone interior leather and a sports pedal cluster among others. 它配备了18英寸的AMG轻合金轮毂，运动悬挂，双色调内饰皮革和运动踏板组等.
