您要查找的是不是：
- levitation force model 悬浮力模型
- Force Model of Large Sized Rolling. 大型卷板机的力学模型。
- This paper presents briefly the structure of a permanent type HTSC maglev vehicle model and analyses some exprimental results of levitation force, guidance force and stator current of linear motor. 本文简要地介绍了一辆永磁型高温超导磁浮模型车的结构，分析了不同冷却间隙时的悬浮力，导向力的试验曲线以及直线电机定子绕组电流波形。
- It can also be well used for the dynamical levitation force and magnetic field measurement. 该套测试装置，将工作效率提高到原来的300%25以上。
- In this paper excitation modes and control stra-tegies of levitation force winding for magnetic suspension bearingless motors are analyzed. 进一步推导出绕组极数选取方案与悬浮力绕组励磁方式的关系。
- Aim to this practical problem, the influence of the lateral movement on the vertical levitation force and the horizontal lateral force was studied in this paper. 针对这一实际向题，本文研究了横向运动对竖直悬浮力和水平导向力的影响。
- The development and characteristics of cold crucible levitation melting are introduced, and the influence of different crucible shapes upon levitation force is analyzed. 介绍了冷坩埚悬浮熔炼的发展和特点，分析计算了不同坩埚形状对悬浮力的影响。
- Magnetic levitation force or magnetic repulsive force is an objective and strong force, which may play some role in mineralizations of Au as well as nonferrous metals. 磁斥力(又称磁悬浮力)在地学中的应用正在受到越来越多的关注。
- At last, the surface force model is provable because experimental result is close to this model. 最后，利用推导出的理论模型与得到的力学实验值作一比较，以验证其正确性。
- Chapter 3 analysizes the news papering markets, and focuses on the key industry factors with the Five Force Model by Boter. 第三章，对南国今报所处的行业市场进行分析，并运用波特的“五力”竞争模型对行业关键因素进行分析。
- Research results are as following: The force model of oil droplet was established and the pathway of oil droplet was simulated based on the DPM model. 本文的研究对象为一种典型的卧式油气分离器。本文的主要研究工作及结论为： 建立了油滴的受力模型，应用欧拉-拉格朗日DPM模型数值模拟了油滴的运动轨迹；
- It was found that the decay of levitation force is dependent on both the maximum lateral displacement and the movement cycle times, while the guidance force hysteresis curve does not change after the first cycle. 研究发现运动过程中的悬浮力衰减与最大横向偏移量和往返运动次数有关；但导向力在第一次往返运动之后的往返运动中迟滞曲线基本不变。
- So this paper firstly introduce a predigestion of the process, and then introduce the instantaneous force model considering the abrasion of the cutter. 本文从简化工艺系统入手，对切削力进行建模，并充分考虑刀具磨损的影响。
- The levitation force and the lateral force of a HTS above the experimental permanent magnetic guideway were calculated by this method. Numerical results proved a series of phenomena in the experiments and agree well with the experimental results. 文中利用此方法计算了高温超导体在实验永磁导轨上方的悬浮力与导向力，重现了实验中观察到的一系列悬浮力与导向力特性，计算结果与实验结果吻合较好，从而证实了此方法的有效性。
- The parameters in the restoring force model corresponding to the design parameters of SRC member and structure are also determined. 建立了型钢砼结构(空腹式)的光滑恢复力模型参数与结构设计参数的关系；
- Wang Baoguo,Wang Fengxiang.Excitation and control analysis of levitation force wingding for magnetic suspension bearingless motors[J].Proceedings of the CSEE,2002,22(5):105-108(in Chinese). [5]王宝国;王凤翔.;磁悬浮无轴承电机悬浮力绕组励磁及控制方式分析[J]
- The experimental results show that the electromagnetic force model of the Halbach actuator is comparatively accurate and the current-controlled strategy is feasible. 实验结果表明，海尔贝克型执行器的电磁力模型较准确，电流控制策略可行。
- All levitation forces of the running train were obtained according to the distributions of overall magnetic conductance function and current charge curve for stator and rotor. 通过研究列车所在位置处的定子与转子总的磁导率函数分布和励磁曲线分布，得出列车运行过程中所有悬浮力的大小。
- By setting up force model of rolled stock in cutting area, function relation among clamping force, side clearance of cutting blade and side thrust is given out. 建立了轧件在剪切区的力学模型，给出了压板力、剪刃侧隙与侧推力的函数关系，并提出减小侧推力影响的对策。
- In respect to the rolling characteristics of cool rolling machine and the rolling theory,this paper adopts linear approximation to set up a rolling force model. 轧制压力的大小,除了与钢种的变形抗力有关之外,还与变形时的受力方式、轧件形状尺寸和摩擦条件有关。
