您要查找的是不是：
- lever latch cap screw 手柄弹键盖螺钉
- LANDING GEAR CONTROL LEVER LATCH SOLENOID. 起落架收放手柄锁定电磁线圈。
- Tapping is the process of cutting a thread inside a hole so that a cap screw or bolt may be threaded into it. 攻丝是在一个孔中车出螺纹,以便装上有帽螺钉或螺栓。
- To adjust the setting of the valve, loosen locking cap screw with hex wrench, see Figure 3. 如果要调节阀门的设置，则利用六角扳手松开锁紧帽螺丝，参阅图3。
- Heat and unscrew all the cap screws. 将全部有头螺钉加热并拧下来。
- The reader might as well imagines, under the zero gravity condition, buries the head Harbo inside, then twists more than 100 small hexagonal cap screw nail. 读者不妨想象一下，在零重力条件下，将脑袋埋进“哈勃”里面，而后拧掉100多颗小六角帽螺丝钉。
- A cap screw forgets after avoid by all means opens bottle, can make otherwise alcohol composition volatilizes, also can make flavor oxidizes and deteriorate. 切忌开瓶后忘记把瓶盖扭紧，否则会令酒 精成分挥发，也会令香料氧化而变质。
- Where possible, screws will be hex socket head cap screws. 只要空间允许,都使用内六角沉头螺丝,其它种类的螺丝,譬如固定螺丝,必须是内六角的。
- If the fault appears to be in the circuit board itself, a simple swap of circuit board and heat-sink can be facilitated by the lossening of 4 small cap screw and wire for wire transferal. 如果故障是发生在电路板上的话，只要拧松四个小帽螺钉，用一根电线把线路板和散热器作简单的交换就可以了?
- The body halves are then separated by removing cap screws and hex nuts. 拆卸了盖螺丝和六角螺母后，阀体就分为两半。
- Diaphragm chamber is easily changed by the removal of two cap screws. 通过拆卸两个帽螺丝，可以容易地改变隔膜腔室。
- If I could only latch onto some of your know- how. 要是我能有一点你的那种决窍就好了。
- Latch on to some very valuable books. 搞到几本极有价值的书。
- Please latch the front gate when you leave. 走时请把大门的碰锁锁好。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- Please leave the door latch shut. 请把门闩上。
- He always latch on to me when he see me at a party. 他在聚会上一看见我就总是缠著我。
- I can't get this screw to come out of the wall. 我无法把这颗螺丝钉从墙上取出。
- Put the gear lever in the neutral position. 把变速杆推到空挡的位置。
- If I could only latch on to some of your know how! 要是我能有一点你的那种诀窍就好了。
