您要查找的是不是：
- leakage flux density 漏磁通量密度
- A unit of magnetic flux density equals to 1 maxwell per square centimeter. 一种磁通量密度单位，等于每平方厘米麦克斯韦。
- And the GSR flux density will increased in the last decade of 20 centuries. 20世纪后10年年平均总辐射通量密度有增大的趋势。
- The system that applied leakage flux theory consisted of testing sensor, signal acquisition unit, computer system and unit for alerting and marking. 该系统主要包括检测传感器、信号采集器、计算机系统和打标器。
- PM-shield TFSRM has permanent magnet on the teeth of stator and rotor to shield from a leakage flux at airgap, so it can increase the torque output. 采用三维有限元分析方法对电机的磁场进行了分析，表明了永磁屏蔽的有效性。
- Abstract: Powder core has high saturation flux density and excellent motion linearity of DC bias. 摘要：磁粉心具有较高的饱和磁通密度和较好的直流偏磁动态线性。
- The calculation of the magnetic field distribution in ferromagnetic materials is one of the fundamental problems in magnetic leakage flux NDT. 铁磁材料内部磁场分布的计算是漏磁法无损检测的基本问题之一。
- The time-resolved neutron flux density measurement system on HT-7 Tokamak is presented in the paper. 本文介绍了HT 7超导托卡马克上的时间分辨中子注量率测量系统。
- In particular, approximate expressions for the air gap flux and the airgap flux density are derived. 特别是，近似表达式气隙磁通和气隙磁通密度的计算公式。
- The result shows: short splitter has weak influence on the suction pressure distribution, leakage flux and the position leakage vortex rotated on the tip of principle blade. 结果表明：短弦长小叶片对大叶片吸力面负荷分布、泄漏量以及泄漏涡的产生位置的控制作用较弱；
- A new magnetic leakage flux testing technique with a stationary probe and spiral transporting tubes was presented and its differences with traditional ones were analysed. 摘要介绍了一种新开发的“探头固定／钢管螺旋前进”的钢管漏磁探伤技术，分析了它与传统漏磁探伤方式的差异和优劣。
- Because of their high flux density and superior temperature stability, cast magnets have been accepted in the widest range of application. 由于它们的高通量密度和优越的温度稳定性，铸造磁体已被接受的范围最为广泛的应用。
- The results showed that shielded screen can regulate the magnetic flux density distribution to assure melt in ideal state in forming inductor. 结果表明:屏蔽罩能够调节成形感应圈内的磁场分布,使成形感应圈内的熔体处于合理状态;
- Selection of laser pulse shape, pulse duration, flux density are discussed in pulsed laser microwelding and the experimental results are given. 讨论了脉冲激光微型焊接中;对于激光的脉冲形状、激光脉冲宽度、激光通量密度等的选择;并给出了实验结果.
- The effects of contact angle, heat flux density, operating temperature and groove geometry on radial dryout point were discussed. 讨论了接触角、加热热流密度、运行温度、槽道几何对干点位置的影响。
- Chen Yangsheng, Lin Youyang.Calculation of air-gap flux density in perm anent magnet motors[J].Proceedings of the CSEE, 1994, 14(5):17-26. [2]陈阳生;林友仰.;永磁电机气隙磁密的分析计算[J]
- Monte-Carlo calculation of keff and neutron flux density in fast neutron critical assemblies with multi-group section data[J]. 引用该论文 徐家云;张一云;林理彬;白立新;范晓强;周厚全.
- It is well established that facet damage is caused by the optical flux density at the laser facet and that it is not a function of the operating current. 业已明确肯定，端面损伤是由激光器端面的光流密度引起的，并且不是工作电流的函数。
- The on-line pipe flaw detector with magnetic leakage flux principle is introduced, providing details regarding the exciter circuit structure, magnetic sensors and signal processing. 介绍了基于漏磁探伤原理的钢管管缝在线检测装置,对装置的励磁磁路结构、磁敏感检测元件及其信号处理作了较详细的分析论述。
- Ideal AMF characteristics should be as follows: strong axial magnetic flux density at current peak, weak axial magnetic flux density at current zero and low conductor resistance. 理想的纵向磁场特性应当是电流峰值时纵向磁感应强度强，电流过零时纵向磁感应强度弱，以及导体电阻值小。
