您要查找的是不是：
- The smaller the latex particle size (Ps), the higher the dry, and wet pickings and paper gloss ;to acquire better opacity, larger particle size must be chosen. 小粒径者光泽度和乾、湿强皆佳，要有良好不透明度则需要大粒径之乳胶。
- Particle size of latex particles 乳胶粒粒径
- Determination of Cathodic Electrodeposition Paint Latex Particle Size by Light Transmission Method 光透射法测定阴极电泳漆乳液粒径
- latex particle size 乳胶粒径
- The average particle size of APU latex based on DMBA is larger but with narrower distribution than that based on DMPA. 以DMBA为内乳化剂制备的APU乳液粒径大而分布窄。
- The results showed that this method was a good way for preparing PBA latex with large particle size. 采用种子乳液聚合法进行PBA胶乳粒径放大方法简便、效果明显。
- The particle size and distribution of latex was influenced by functional monomer. 功能单体对胶乳粒子大小及分布有较大影响；
- WHAT IS THE CRITICAL PARTICLE SIZE ? 什么是关键的粒子尺寸?
- The influence of agitation intensity and agitator types on size of latex particle, polymerization rate, and latex stability during emulsion polymerization is reviewed. 综述了乳液聚合过程中搅拌强度对乳胶粒径、聚合反应速率、乳液稳定性的影响及搅拌器形式的影响。
- It was demonstrated that the minimum film-forming temperature of latex could be reducd by enlarging the dispersity of particle size distribution. 通过粒径分布的多分散化，可显著降低乳液的最低成膜温度。
- Polybutyl acrylate(PBA)latex with large particle size was prepared by seeding emulsion polymerization.Effect of prescriptions and process on particle size were studied. 采用种子乳液聚合法制备了丙烯酸酯-苯乙烯-丙烯腈共聚物生产工艺中的基础胶乳聚丙烯酸丁酯(PBA),考察了配方和工艺条件对其粒径增大的影响。
- The introduction of the acrylic or methacrylic acid in middle layer is helpful to obtain a latex with smaller particle size and more narrow particle size distribution. 中间层引入(甲基)丙烯酸可减小乳胶粒径，并使粒径分布更均匀。
- In clastic sediments, particle size is an important factor. 在碎屑沉积物中，颗粒大小是个重要因素。
- The sizes of the latex particles are investigated by TEM. 利用TEM观察了乳胶粒子大小及规则程度。
- One important measure of the instability is particle size. 不稳定性的一个重要测量标准是微粒的尺寸。
- The distribution of cementite particle size displayed bimodal. 颗粒状渗碳体的尺寸呈双峰分布。
- The hydrolytic reaction,crosslinking reaction and latex particle structural morphology were characterized by IR and TEM. 以红外光谱、透射电子显微镜表征水解反应、交联反应及乳胶粒结构形态。
- When Al powder particle size is -260/+300,the speed is mod... 铝粉粒度在-260/+300目时,焊接质量与操控性最佳。
- The preparation in osmotic swelling and the application performances of hollow latex particle in electrophoretic display ware mainly discussed in this study. 本文研究的主要内容为以渗透溶涨法制备中空乳胶粒子,并研究其在电泳显示方面的应用性能。
- The design of MSF microlatex filler for soft leather was reviewed in this paper. It is contained the design of molecule and latex particle, the selection of additives, etc. 论述了MSF微胶乳型软革填充树脂的设计问题，包括粒子设计、分子设计和助剂搭配等。
