您要查找的是不是：
- In this thesis, we will discuss the issue about the problems of taking silicon as a light emitting device. 本论文即著眼于此一问题，探讨以矽作为发光元件所产生的种种问题。
- We are using a Ti : sapphire laser and a high frequency phase sensitive lock-in loop to achieve time-resolved the dynamics properties of the light emitting devices. 使用钛:蓝宝石锁模脉冲雷射、高频相位灵敏锁向迴路与雷射共焦扫描显微镜以取得发光二极体之时间解析动态特性。
- A double layer light emitting device is reported which based on a triphenylamine-containing PPV with sandwiched structure of ITO/polymer/Alq3/Mg: Ag/Ag. 报道了一种共轭主链结构三苯胺PPV聚合物发光二极管,器件结构ITO/ploymer/Alq_3/Mg:Ag/Ag。
- Since the efficiency and stability still need to be enhanced, POLED (flexible organic light emitting device) is still not mature enough to be commercialized. 摘要柔性OLED技术尚未成熟，要实现产业化，其稳定性和显示效率仍有待进一步改善。
- The models of the laser emitting subsystem, the PIN photoelectric receiving subsystem and the APD echo receiving subsystem of the laser system for identifying &communicating presented. 本文对激光识别与通信系统的激光发射子系统、PIN光电接收子系统和APD回波接收子系统建立了数学模型。
- Lasers emit intense beams of colored light. Turn on all of the lasers. 激光能发出强烈的光束，打开所有的激光发射器。
- Secondly, the SiGe-based BiCMOS light emitting device is used as photo detector, when a reverse bias is applied. Photo currents are measured and the photo detecting characteristics are studied. 第二部分则利用设计之矽锗基金氧半元件逆向操作，以光照产生光电流，观察其作为光侦测器的特性。
- In this research, we develop a nearly white light emitting device by integrating blue/green emission from a GaN based light emitting diode (LED) with red emission from a porous SiO2 layer. 本研究中，我们使用多孔之二氧化矽薄膜当作红光光源以及氮化镓材料之蓝/绿光发光二极体，整合成一个能发出近白光的元件。
- A method of weld seam measurement based on structured light stereovision is proposed, which employs two charge coupled device cameras and a laser emitter fitted on the end-effector of the robot. 提出了一种基于结构光立体视觉的焊缝测量方法,并给出了一种简单的摄像机与激光器标定方法。
- The silicon light emitting device also can be used as a photoreceiver under reverse bias, receiving the light emitted from the other one. 此发光元件在反偏下也可当成光接收元件，接收来自同结构顺偏元件所发出的光。
- Because of the applications in UV-Blue light emitting devices, gallium nitride materials have drawn much attention. 摘要:氮化镓材料因其在蓝紫外光发光元件上的应用而广受各界注意。
- Silicon light emitting devices are more and more important with fast evolutions of the ULSI industry. 摘要:随著积体电路工业快速演进，以矽作为发光源的元件显得日益重要。
- Additionally, some newer CO2 lasers emit lower energy which can improve the appearance of the skin without affecting the dermis, and thereby shortening recovery time. 此外，一些较新的CO2激光器发射出低能量，可改善外观，不影响皮肤的真皮层，从而缩短恢复时间。
- Polymer light emitting devices (PLED) have become an active area of research due to their potential applications in flat panel displays (FPD). 由于聚合物电致发光显示（PLED）技术在平板显示领域潜在的优势（如高对比度，宽视角，柔性显示等等），它已经成为平板显示领域的研究热点之一。
- TAED Telex Automatic Emitting Device 电传自动发射器
- double-face light emitting device 双面发光设备
- In the counting system, a semiconductor laser emitter is used as the light source, point laser beam produced by optic system, reflection of part transferred into electric signal by photoelectric triode, and SCM system as the counter. 采用半导体激光发射器作为光源，经过光学系统形成的最小激光束照射器件，反射光由光电三极管进行光电转换，计数控制使用单片机系统。
- double layer polymer light emitting device 双层聚合物发光器件
- organic light emitting device(OLED) 有机电致发光器件
- CdS thin films have a number of particular applications. They can be utilized as photovoltaic devices, sensors, and light emitting devices, optical integrated circuits and storage. 硫化镉薄膜具有多种特殊功能，可以制作光伏器件、传感器、发光器件、光学集成和储存器等。
