您要查找的是不是：
- The structure and toughened mechanisms of nacreous layer were introduced to design the laminated composites. 把贝壳的结构机制及韧化机理应用于叠层复合材料的设计中。
- Finally recommended some to solve the problems in prepation of C/BN laminated composites for the future. 针对在制备C/BN层状复合材料中出现的问题,对今后需要展开的工作进行了简单的展望。
- The idea of designing intermetallics based laminated composites is derived from the microstructure of nacre in the nature. 金属间化合物基叠层复合材料是受自然界中贝壳结构的启发而设计的一种新型高温结构材料。
- D braided compositese overcome the limitations of conventional laminated composites,such as low interlaminar strength and low damage tolerance. 编织结构复合材料克服了层合结构复合材料层间强度低，损伤容限低等缺点。
- C/h-BN laminated composites was also manufactured by SPS, the relative density of BN increased with increasing sintering temperature and holding time. 研究发现，随着烧结温度的升高，BN的致密度也是逐渐增加的。
- C/BN laminated composites were obtained by hot-pressing, and the micro-structure and property of the sintered bodies were investigated. 采用热压烧结方法制备了C／BN叠层复合材料,并对材料的结构和性能进行了详细的表征。
- By using aluminum alloy as the base material and fiber/resin as the interlaminar material, the fiber/res-in/aluminum alloy laminated composites were prepared. 利用铝合金作为基体材料,纤维/树脂作为夹层材料,设计并制备了纤维/树脂/铝合金叠层复合材料。
- Laminated composite is a novel technical in toughening ceramics. 层状复合是一种新型陶瓷增韧构型。
- Piezoelectric sensors and actuators may be considered as multilayer laminated composites consisting of alternating layers of piezoelectric and non-piezoelectric materials. 压电传感器和致动器都可以看成是由压电材料层和非压电(弹性)材料层交替铺设而成。
- The breakage patterns of Moso bamboo-Chinese fir laminated composites, including shearing failure after air-dry and water soaking and bending failure under air-dry condition, wer... 总结了气干和水湿处理后,竹杉层积复合材剪切破坏模式以及气干条件下弯曲破坏模式。
- Heat press was employed to fabricate 5-layer fabric into laminated composites,all together 3 groups of laminates were produced. 利用热压机将5层织物复合,分别制成3种复合材料板材。
- The structural intensities for laminated composite plates and the isotropic plates were analyzed and discussed. 算例表明，复合材料正交异性层合板的结构声强流线图与各向同性板存在明显不同的特性。
- Abstract: A refined delamination model for laminated composite beams is presented. 文摘:建立了一种精化的复合材料层合梁脱层模型。
- This study indicates the promising prospect of porous laminated composite scaffolds in bone tissue engin... 显示了这种材料在骨组织工程领域的广阔应用前景。
- The energy flow path, the energy flow sources and sinks of laminated composite plates can be identified for different loading cases and boundary conditions. 从结构声强向量图和流线图可获得关于能量传递路径、源位置和能量汇合点的许多信息。
- In order to investigate the superplasticity of ceramic matrix laminated composite, the superplastic deep-drawing process was simulated by FEM. 为研究陶瓷基层状复合材料的超塑性能,对其超塑拉深成形过程进行了有限元模拟。
- In this paper,a last-ply failure(LPF) analysis method for laminated composite plates is incorporated in the finite element code-ANSYS. 采用有限元方法分析了复合材料层合板结构的最终失效强度,并以此对结构进行了优化分析。
- Moso bamboo-Chinese fir laminated composites 毛竹杉木层积材
- The laminate composites with magnetic and ferroelectric pieces show the high magnetoelectric coupling coefficients at the appropriate coupling model of applied field. 将磁性和铁电材料进行层状复合，选择合适的外场耦合模式，得到了高磁电耦合系数的复合材料。
