您要查找的是不是：
- isothermal forging temperature 等温锻造温度
- So it is usually processed by isothermal forging, which keep temperature steady to improve the plasticity of magnesium alloy. 等温锻造成形过程中温度基本不变,可消除镁合金在常温下成形性能差的问题。
- The character and development of isothermal forging process,its forming temperature and forming rate for titanium alloy is introduced in this paper. 本文介绍了钛合金等温锻造技术的特点,国内外钛合金等温锻造的发展及其成形温度和变形程度等工艺。
- Controlling microstructure of Ti-47 Al-5 (C r+V+Mo +Nb ) ally by means of isothermal forging has been studied. 通过等温锻造方法对Ti－47Al－5（C＋V＋Mo＋Nb）（at%25）合金进行组织控制。
- Isothermal forging of semi-finished products are close to finished size, very small margin. 经等温锻造的半成品已经接近成品尺寸，余量很小。
- Among those forging methods, isothermal forging obviously exceeds others for its high quality and low cost. 在各种锻造方法中,等温锻造技术的高质量、低成本优势明显地优于其他方法。
- According to the technique standard of the portait rockerarm forging,the isothermal forging is sured of the best forming process. 根据纵向摇臂技术条件要求，确定了等温模锻工艺为最佳成形工艺方案。
- Isothermal forging process of a grating forging is simulated by finite element method (FEM) for finding problems in the process and improving the process. 摘要用有限元方法模拟栅型锻件的等温锻造成形过程。发现了在工艺制定中存在的问题并且改进了工艺。
- Thus the efficient measure of preventing from oxidization was introduced to improve the superplastic deformation and quality of isothermal forging for titanium alloy. 通过采取相应措施防止氧化,以提高钛合金超塑性变形的性能,确保钛合金等温锻造质量。
- RESEARCH ON FORGING TEMPERATURE RANGE OF PURE IRON 工业纯铁合理锻造温度范围的研究
- Beded on research and application for years,the effect of the isothermal forging and heat treatment technolegies of LC9 aluminium alloy forgings on its structure and properties was discussed. 在试验研究和多年来生产应用的基础上，就LC9铝合金锻件的等温锻造和热处理工艺对组织与性能的影响进行了分析讨论。
- Research and Development of Isothermal Forging of Titanium Alloys 钛合金等温锻造技术研究进展
- Study on Isothermal Forging Process of Titanium Alloy Wing Joint 钛合金弹翼接头等温锻造工艺研究
- Isothermal Forging Process of 2214 Alloy Anti-torque Arm 2214铝合金防扭臂等温模锻工艺的研究
- Isothermal forging process of upper anti-torque arm of 2214 alloy 2214铝合金上防扭臂等温模锻工艺的研究
- A small adjustment will equalize the temperature in the two rooms. 稍作些调节就会使两间房内的温度相等。
- Several Questions Concerning the Forging Temperature Interval of Steel 关于钢的锻造温度范围的几个问题
- There is an imperceptible change in temperature. 温度有细微的变化。
- The isothermic forging properties of LD5 alloy for making high web and thin wall forgings are studied. 研究了LD5铝合金等温锻造成形高筋薄壁锻件的工艺特性。
- The food should be kept at low temperature. 这种食品应低温保存。
