您要查找的是不是：
- The isothermal crystallization behaviors of polyazomethine(PAM)/nylon 6 composites were investigated by DSC. 采用差示扫描量热法 (DSC)对聚甲亚胺 (PAM) /尼龙 6复合材料等温结晶过程进行了研究。
- The non-isothermal and isothermal crystallization kinetics of PA1212 were studied by DSC. 采用DSC方法研究了PA1212的非等温和等温结晶动力学。
- The DSC method is used to research isothermal crystallization kinetics of synthesized copolyester. 用DSC法研究合成共聚物的等温结晶动力学。
- The isothermal crystallization kinetics and the structure of chains of PET/Al-2O-3 were studied by depolarized light intensity (DLI) and viscosity. 用解偏振光强法 (DLI)和粘度法研究了 PET/Al2 O3体系从熔融态等温结晶的动力学过程及分子链的结构 .
- The isothermal crystallization curves of PPS and its blends both exhibitdouble peaks because of the different end group structure of PPS. 经等温结晶处理的试样,在熔融时相应的PPS也呈现双峰,其低温峰随结晶温度的提高而向高温方向移动。
- The spherulitic growth rate and isothermal crystallization rate of PEG or PLLA were influenced when the other component was added. 当其中一成分的增加会影响PEG或PLLA的球晶成长和等温结晶的速率。
- However, whether on the nonisothermal crystallization or the isothermal crystallization conditions, the dual melting peaks always existed. 而无论在等温结晶还是非等温结晶条件下，都存在双熔融峰现象，高温熔融峰值基本不变，低温熔融峰值由于纳米粒子的加入而有所提高；
- The isothermal crystallization kinetics of poly (lactide) (PLA)plasticized by poly (ethylene glycol) (PEG)of different molecular weights were studied by means of DSC. 采用DSC方法对聚乙二醇(PEG)增塑聚乳酸的等温结晶动力学进行了研究。
- The isothermal crystallization kinetics of poly (lactide) (PLA) plasticized by poly (ethylene glycol) (PEG) of different molecular weights were studied by means of DSC. 摘要采用DSC方法对聚乙二醇(PEG)增塑聚乳酸的等温结晶动力学进行了研究。
- Employing differential scanning calorimetry (DSC) and transmission electron microscopy (TEM), the isothermal crystallization process and precipitated phases of Zr41.2Ti13.8Cu12.5Ni10Be22.5 (at%) bulk amorphous alloy were investigated. 利用差示扫描量热法(DSC)和透射电镜(TEM)对 Zr41.;2Ti13
- Kinetics of crystallization of bulk Pd 77.5 Cu 6Si 16.5 amorphous alloys was analysed by John Mehl Avrami equation with non isothermal crystallization and Kissinger peak shift method. 应用变温条件下的JMA方程和Kissinger方程研究块体Pd77.;5Cu6 Si1 6
- The isothermal crystallization behaviors of nylon 1010 with different molecular weights were studied by DSC in this paper. Within the studied temperature scope, the isothermal crystallization behavior of nylon 1010 can be described by Avrami equation. 用示差扫描量热法 (DSC)研究了 3种不同分子量的尼龙 1 0 1 0样品的等温结晶行为 ,在所研究的温度范围内 ,尼龙 1 0 1 0的等温结晶过程符合 Avrami方程。
- The isothermal crystallization kinetics of intercalatively polymerized polypropylene/montmorillonite (PP/MMT) nanocomposites and isotactic polypropylene (PP) was investigated by differential scanning calorimetry (DSC). 采用差示扫描量热法 (DSC)对插层聚合法制备的聚丙烯 /蒙脱土纳米复合材料 (PP MMT)的等温结晶过程进行了研究 .
- The crystallization morphology and isothermal crystallization process were studied by means of polarized microscope and DLI(Depolarized Light Intensity) for poly(ether ester) block copolymers. 采用偏光显微镜和光学解偏结晶速率仪研究了嵌段聚醚酯共聚物的结晶形态和等温结晶过程。
- Isothermal crystallization kinetics of a low isotactic polypropylene(LIPP) sample at different crystallization temperatures have been investigated by employing differential scanning calorimetry(DSC). 利用DSC法研究了低等规度聚丙烯(LIPP)的等温结晶动力学。
- The study on isothermal crystallization of PE-g-MAMe shows that the Avrami approach can still be applied in this system.Compared with polyethylene, the Avrami exponent n of ionomers decreases. 而对离聚体的等温结晶性能研究表明：Avrami方程仍然适用，但指数n值较基体聚合物降低；
- kinetics of isothermal crystallization 等温结晶动力学
- The isothermal crystallizing rate of polychlorOprene(CR)was determined by differential scanning calorimetry (DSC) at constant speed of temperature rising. 用差热扫描法,采用等速升温,测定了氯丁橡胶(CR)等温结晶时的结晶速率。
- stepwise isothermal crystallization 阶梯等温结晶
- non - isothermal crystallization 非等温结晶
