您要查找的是不是：
- Multi-arc ion plating technique is using cool cathode with self-maintaining arc discharge as evaporation source. 多弧离子镀技术是一种在真空中将冷阴极自持弧光放电用于蒸发源的镀膜技术。
- unbalanced magnetron sputter ion plating technique 非平衡磁控溅射离子镀技术
- NEW TECHNOLOGY OF RAISING CANNON PIPE LIFE BY ION PLATING TECHNIQUE 应用离子镀技术增加炮管寿命的一种工艺
- NiCrAlY coating was deposited on Ti6Al4V substrate by arc ion plating (AIP). 采用电弧离子镀(AIP)技术在Ti6Al4V基体表面沉积制备了NiCrAlY涂层。
- NiCrAlY coatings were deposited on superalloy IC-6 by arc ion plating (AIP). 采用电弧离子镀技术在IC-6高温合金上沉积NiCrAlY涂层.
- The ion gold mixing plating is multi arc ion plating combining with magnetron sputtering technique and is mainly used in gold plating to replace the commonly used but harmful nickel plating. 离子掺金镀是多弧离子镀与磁控溅射有机复合技术，主要用于离子镀金代替目前盛行而危害人体健康的闪镍工艺。
- Cathodic arc ion plating (CAIP) has been widely applied in modern technology field. 多弧离子镀在现代科技领域中有着广泛的应用。
- KEYWORDS : GIMS, ion source, anode layer, sputtering, TiN, ion plating, medium frequency, pulsed DC. 中文关键词：气离溅射、离子源、阳极层流、溅射、氮化钛、离子镀膜、中频、脉冲直流。
- Abstract Plasmas in Multi-Arc Ion Plating(MAIP) are made up of glow and arc plasma. 多弧离子镀中的等离子体是由辉光等离体和弧光等离子体迭加而成的。
- KEYWORDS: GIMS, ion source, anode layer, sputtering, TiN, ion plating ， medium frequency, pulsed DC. 中文关键词：气离溅射、离子源、阳极层流、溅射、氮化钛、离子镀膜、中频、脉冲直流。
- The question of "dimple" during the process of HCD ion plating deposition was discussed. 有负偏压时沉积的薄膜比无负偏压时沉积的薄膜具有更好的机械性质。
- PbO_2-matrix composites containing nano-grade TiO_2 as dispersed phase have been obtained on Ti substrate using nano-composite plating technique and were applied to EOP. 用纳米复合电镀技术制备了TiO_2掺杂的PbO_2电极,并利用该电极电解中性电解液制备臭氧。
- The advantages of ion imitating gold electroplating , process sorts and properties of common imitating ion plating deposits were summarized. 对离子仿金电镀工艺的优点、常用仿金离子镀镀层的种类和性能进行了概括。
- Abstract: This paper introduces the application and development of ion plating, ionodialysis, ion implantation and the compound technology. 文摘:介绍了离子镀、离子渗、离子注入及其复合工艺的应用与发展。
- There are two singeing techniques. In the plate technique, the cloth is passed rapidly over a curved copper plate heated to a bright red. 烧毛工艺有两种。在板式烧毛工艺中,织物快速地在一个被加热至通红的曲面铜板上通过
- Gradient(Ti,Al) N coating was deposited on 1Cr11Ni2W2MoV stainless steel for aero-engine compressor blades by arc ion plating. 利用电弧离子镀技术在航空发动机压气机用1Cr11Ni2W2MoV在不锈钢上沉积了(Ti;Al)N梯度涂层.
- This paper introduces the application and development of ion plating, ionodialysis, ion implantation and the compound technology. 介绍了离子镀、离子渗、离子注入及其复合工艺的应用与发展。
- The influences of many factors on substrate temperature have been studied in detail during arc ion plating (AIP) in this paper. 采用该计算模型分析了基体材质、形状与电弧离子镀膜工艺参数改变时基体温度的变化,经实验验证,模型计算与实验数据基本吻合。
- Abstract Nanocrystalline Cu films were prepared on an unetched glass substrate by an electroless plating technique with using Sodium Dodecyl Benzene Sulfonate (SDBS) as an additive in the bath. 摘要 利用化学镀铜工艺，以十二烷基苯磺酸钠(SDBS)作为镀液添加剂，在未经刻蚀的玻璃表面制备了纳米铜膜。
- Conclusions: In this group of patients, the two-hole symphyseal plating technique group had a higher implant failure rate and, more importantly, a significantly higher rate of pelvic malunion. 结论：在这组病例中，两孔耻骨联合钢板固定技术有较高的内固定失败率，更重要的是骨愈合不良率较高.
