您要查找的是不是：
- internal screw thread finish 内螺纹瓶口
- multiple - internal screw thread 多头内螺纹
- a wrench for turning a tap to create an internal screw thread. 旋转活栓产生内螺纹的扳手。
- a wrench for turning a tap to create an internal screw thread 旋转活栓产生内螺纹的扳手
- a small square or hexagonal metal block with internal screw thread to be fitted onto a bolt. 内侧有螺纹儿、可以被固定到螺栓上的方形或六边形金属块。
- external screw thread finish 外螺纹瓶口
- Using F type screw thread connection. 采用F型螺纹连接方式。
- internal screw thread 内螺纹
- The other components of the case such as the rotating bezel also require a hand finish, particularly for drilling the screw thread and polishing. 表壳的其它部件，如旋转表圈等，同样须用人手处理,特别是钻螺丝内牙和抛光。
- international screw thread 国家标准螺纹,公制螺纹
- Final torque required to pull up joint may vary greatly due to effects of temperature, corrosion, lubrication and thread finish. 由于温度、服饰润滑和螺纹光洁度的影响,拉起连接所需的最后的扭矩可能会有很大的变化。
- While displacement is usually driven by a texture, the Screw Thread shader uses an expression instead. 当置换是通常用一个纹理来驱动，螺纹材质使用一个表达式替代。
- Complete detail drawings of the screw thread insert (Part 2#) by the assembly drawing of the jack. 根据千斤顶装配图拆画件2螺套的零件图。
- This paper presents the method of regenerating internal screw with adhesion technology. 介绍了利用粘接技术修复滑牙内螺纹的方法。
- Specification is 3/4-3 ins. Inlet and outlet is screw thread joint. Used for Pulse-dust-cleaning system. 规格有3/4-3英寸，进出口为螺纹连接，最适用于脉冲清灰系统上。
- Screw thread gauge is the most extensive and practical detector in thread machining. 螺纹量规是螺纹加工中应用最广泛、最实用的检测工具。
- The connection between the screw thread stread structure and inlay circle ensures the airtight of the whole lamp. 采用螺纹结构与镶圈连接的方式保证了灯具整体的密封性能。
- Lubricate adjuster screw threads and pivot with spray lube. 使用喷雾润滑油润滑调整器螺丝螺纹和枢轴。
- There is moderate evidence to support the use of internal screw fixation for treating nondisplaced scaphoid fractures in lieu of using cast immobilization. 摘要目前有证据显示，使用螺钉内固定治疗无移位型舟状骨骨折可在一定程度上替代石膏固定。
- Additional threads in excess of the limit can be queued, but they do not start until other threads finish. 超过此限制的其他线程可以排队,但它们要等到其他线程完成后才启动。
