您要查找的是不是：
- Through the numerical simulation of injection process,and combined with Taguchi experimental method,the relation between processing parameters and the warpage of injection products is studied. 通过模拟注塑成型过程,并结合田口实验设计法,研究了工艺参数与注塑制品翘曲变形的关系,得到了优化的工艺参数。
- injection process parameter 注射工艺参数
- Keywords Rubber,Injection confectioning,Modify,Injection processing parameter,Expert system; 橡胶;注射成型;改性;过程参数;专家系统;
- Application of neural network and orthogonal experiment method in optimization of injection process parameters 神经网络与正交试验法结合优化注射工艺参数
- Influences of Injection Process Parameters on Property of Weld Line of Injecton-molded Part 工艺参数对注塑件熔接痕性能的影响
- Injection process has a great influence on this new type of combustion. 在这种新型燃烧方式中，喷雾过程是重要的影响因素。
- Be familiar with molding machine and their process parameter settings. 熟悉注塑工艺和注塑设备的性能。
- Make proposals of the piece design in order to optimize the injection process. 提供产品设计建议来优化注塑工艺;
- The cored wire injection process was used to produce vermicular cast iron. 应用喂丝工艺生产蠕墨铸铁。
- Be responsible for analysis problem-solving of encapsulation injection process. 负责注塑工艺问题发现，分析及解决。
- Effect of Gas-assisted Injection Processing Parameters on Gas Penetrating Power 气辅注射工艺参数对气体穿透能力的影响
- The effect of the process parameter on the preparation of the carbon nanotube film is discussed. 详细讨论了制备工艺参数变化对碳纳米管生长的影响。
- The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described. 摘要介绍用喂线球化工艺生产优质铸态铁素体球墨铸铁的质量控制要点。
- The structure and process parameters of DSE yarns are analyzed. 分析了DSE纱线的结构和加工性能。
- The heat treater has full laboratory capability to perform product monitoring and process parameter control auditing functions. 热处理方有足够的实验能力来执行产品监督和过程参数控制审计功能。
- Gelatinize of process parameters are shown in table 2. 涂胶的不关工艺参数见表2。
- Processing parameter setup by digital operation panel and memory mode. 数位化操作面板及记忆模组式的加工参数设定功能。
- Working experience: 2-3years, experience with injection process control is preferred. 具有2-3年工作经验,具有注塑流程控制经验者优先。
- The injection process works by prematurely terminating a text string and appending a new command. 注入过程的工作方式是提前终止文本字符串,然后追加一个新的命令。
- With the same laser processing paramete... 理论值与实测值符合很好。
